diff options
Diffstat (limited to 'mcron.texinfo')
| -rw-r--r-- | mcron.texinfo | 1094 |
1 files changed, 1094 insertions, 0 deletions
diff --git a/mcron.texinfo b/mcron.texinfo new file mode 100644 index 0000000..4ceb290 --- /dev/null +++ b/mcron.texinfo @@ -0,0 +1,1094 @@ +\input texinfo +@c %**start of header +@setfilename mcron.info +@settitle mcron 1.0.0 +@c %**end of header + +@syncodeindex fn cp + +@copying +This file documents the @code{mcron} command for running jobs at +scheduled times. + +Copyright (C) 2003 Dale Mellor +This is free software. See the source files for the terms of the +copyright. + +@ignore +Permission is granted to make and distribute verbatim copies of +this manual provided the copyright notice and this permission notice +are preserved on all copies. + +Permission is granted to process this file through TeX and print the +results, provided the printed document carries copying permission +notice identical to this one except for the removal of this paragraph +(this paragraph not being relevant to the printed manual). + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided that the entire +resulting derived work is distributed under the terms of a permission +notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions, +except that this permission notice may be stated in a translation approved +by the Foundation. +@end ignore +@end copying + + +@ifinfo + +@dircategory Individual utilities + +@direntry +* mcron: (mcron). Run jobs at scheduled times. +@end direntry + +@end ifinfo + + +@titlepage +@title mcron - Mellor's cron daemon +@author Dale Mellor + +@page +@vskip 0pt plus 1fill +@insertcopying + +@end titlepage + +@contents + +@ifnottex +@node Top, Introduction, (dir), (dir) +@top mcron + +@insertcopying +@end ifnottex + +@menu +* Introduction:: Introducing mcron. +* Simple examples:: How to use mcron 99.9% of the time. +* Syntax:: All the possibilities for configuring cron jobs. +* Invoking:: What happens when you run the mcron command. +* Index:: The complete index. + +@detailmenu + --- The Detailed Node Listing --- + +Simple examples + +* Guile Simple Examples:: +* Vixie Simple Examples:: + +Full available syntax + +* Guile Syntax:: +* Extended Guile examples:: +* Vixie Syntax:: + +Extended Guile examples + +* AT commands:: +* Every second Sunday:: +* Two hours every day:: +* Missing the first appointment:: +* Penultimate day of every month:: + +Vixie + +* Paul Dixie's copyright:: +* Crontab file:: +* Incompatibilities with old Unices:: + +Detailed invoking + +* Running mcron:: +* Running cron or crond:: +* Running crontab:: +* Exit codes:: + +@end detailmenu +@end menu + +@node Introduction, Simple examples, Top, Top +@chapter Introducing mcron +@cindex introduction +@cindex mcron +The mcron program represents a complete re-think of the cron concept +originally found in the Berkeley and AT&T unices, and subsequently +rationalized by Paul Vixie. The original idea was to have a daemon +that wakes up every minute, scans a set of files under a special +directory, and determines from those files if any shell commands +should be executed in this minute. + +The new idea is to read the required command instructions, work out +which command needs to be executed next, and then sleep until the +inferred time has arrived. On waking the commands are run, and the +time of the next command is computed. Furthermore, the specifications +are written in scheme, allowing at the same time simple command +execution instructions and very much more flexible ones to be composed +than the original Vixie format. This has several useful advantages +over the original idea. + +@cindex advantages of mcron +@itemize @bullet +@item +Does not consume CPU resources when not needed. Many cron daemons only +run jobs once an hour, or even just once a day. +@item +Can easily allow for finer time-points to be specified, +i.e. seconds. In principle this could be extended to microseconds, but +this is not implemented. +@item +Times can be more or less regular. For example, a job that runs +every 17 hours can be specified, or a job that runs on the first +Sunday of every month. +@item +Times can be dynamic. Arbitrary Guile (scheme) code can be provided to +compute the next time that a command needs to be run. This could, for +example, take the system load into consideration. +@item +Turns out to be easy to provide complete backwards compatibility with +Vixie cron. +@item +Each user looks after his own files in his own directory. He can use +more than one to break up complicated cron specifications. +@item +Each user can run his own daemon. This removes the need for suid +programs to manipulate the crontabs, and eliminates many security +concerns that surround all existing cron programs. +@item +The user can obtain an advance schedule of all the jobs that are due +to run. +@item +Vixie cron is implemented in 4500 lines of C code; mcron is 1500 lines +of scheme, despite the fact that it offers many more features and much +more flexibility, and complete compatibility with Vixie cron. +@end itemize + +A full discussion of the design and philosophy of mcron can be found +in the white paper at http://.../mcron.html [FIXME]. + + +@node Simple examples, Syntax, Introduction, Top +@chapter Simple examples +The vast majority of uses of cron are sublimely simple: run a program +every hour, or every day. With this in mind the design of mcron has +been to allow such simple specifications to be made easily. The +examples show how to create the command descriptions, and subsequently +how to run mcron to make them happen. +@menu +* Guile Simple Examples:: +* Vixie Simple Examples:: +@end menu + +@node Guile Simple Examples, Vixie Simple Examples, Simple examples, Simple examples +@section Guile +@cindex guile examples +@cindex examples, guile +@cindex example, run a program every hour +You have an executable @code{my-program} in your home directory, which +you want to run every hour. Create a file @code{job.guile} in directory +@code{~/.cron} with the following contents + +@example +(job '(next-hour) "my-program") +@end example + +then run the command @code{mcron}. + +Want the program to run fifteen minutes past the hour, every two +hours? Edit the file to read + +@example +(job + '(next-minute-from + (next-hour (range 0 24 2)) + 15) + "my-program") +@end example + +and run the command @code{mcron}. + +Or, if you are not comfortable with Scheme, you could use (and see +also the next section) + +@example +(job "15 */2 * * *" "my-program") +@end example + +and run the @code{mcron} command. + +If you want to run other jobs, you can either add more lines to this +file, or you can create other files in your @code{.cron} directory +with the @code{.guile} extension. Alternatively, you can use any file +you want and pass it as an argument to @code{mcron}, or even pipe the +commands into the standard input. + + +@node Vixie Simple Examples, , Guile Simple Examples, Simple examples +@section Vixie +@cindex examples +@cindex examples, vixie +@cindex vixie examples +You have an executable @code{my-program} in your home directory, which +you want to run every hour. Create a file @code{job.vixie} in directory +@code{~/.cron} with the following contents + +@example +0 * * * * my-program +@end example + +then run the command @code{mcron}. + +@cindex vixie compatibility +@cindex compatibility +Alternatively (full compatibility with Vixie cron), set your +environment variable @code{EDITOR} to your favorite editor, run +@code{crontab -e}, put the above line into the edit buffer, save and +exit. For this to work the @code{crond} daemon must be already running +on your system, by root. + +@node Syntax, Invoking, Simple examples, Top +@chapter Full available syntax +@menu +* Guile Syntax:: +* Extended Guile examples:: +* Vixie Syntax:: +@end menu +@node Guile Syntax, Extended Guile examples, Syntax, Syntax +@section Guile Syntax +@subsection Job specification +@cindex guile syntax +@cindex syntax, guile +@findex job +In Guile-formatted configuration files each command that needs +executing is introduced with the @code{job} function. This function +always takes exactly two arguments, the first a time specification, +and the second a command specification. + +@cindex time specification, procedure +@cindex procedure time specification +The first argument can be a procedure, a list, or a string. If a +function is supplied, it must take exactly one argument, which will be +the ``current'' time in UNIX format, and the return value of the +function must be the time in UNIX format when this action should next +be run. The following functions are available to facilitate the +computation: + +@findex next-second-from +@code{(next-second-from time . args)} without arguments this +returns the second after the current one. With the extra arguments, +these form a list of seconds in the minute when the action should run, +and the function will return the time of the next allowed second +(which may be in the next minute of the hour). @footnote{Note that +while commands can be scheduled to run at any second, it is unlikely +that they will be executed then but some time shortly thereafter, +depending on the load on the system and the number of jobs that mcron +has to start at the same time.} + +@findex next-minute-from +@findex next-hour-from +@findex next-day-from +@findex next-week-from +@findex next-month-from +@findex next-year-from +Similarly to @code{next-second-from}, there are also +@code{next-minute-from}, @code{next-hour-from}, @code{next-day-from}, +@code{next-week-from}, @code{next-month-from}, @code{next-year-from}. + +@findex range +Furthermore, the optional argument can be fulfilled by the function +@code{(range start end . step)}, which will provide a list of values +from start to (but not including) end, with the step if given. For +example @code{(range 0 10 2)} will yield the list @code{'(0 2 4 6 8)}. + +@findex next-second +@findex next-minute +@findex next-hour +@findex next-day +@findex next-week +@findex next-month +@findex next-year +@cindex time specification, list +@cindex list time specification +If the first argument to the @code{job} function is a list, it is +taken to be program code made up of the functions @code{(next-second +. args)}, @code{(next-minute...)}, etc, where the optional arguments +can be supplied with the @code{(range)} function above (these +functions are analogous to the ones above except that they implicitly +assume the current time; it is supplied by the mcron core when the +list is eval'd). + +@cindex time specification +@cindex time specification, string +@cindex string time specification +@cindex time specification, vixie-style +@cindex vixie-style time specification +If the first argument to the @code{job} function is a string, it is +expected to be a Vixie cron-style time specification. See the section +on Vixie syntax for this. + +@cindex job execution +@cindex command execution +@cindex execution +The second argument to the @code{(job)} function can be either a +string, a list, or a function. In all cases the command is executed in +the user's home directory, under the user's own UID. If a string is +passed, it is assumed to be shell script and is executed with the +user's default shell. If a list is passed it is assumed to be scheme +code and is eval'd as such. A supplied function should take exactly +zero arguments, and will be called at the pertinent times. + +@subsection Sending output as e-mail +@cindex email output +@cindex email from guile script +@cindex standard input to commands +@findex with-mail-out +When jobs are specified in a vixie-style configuration, the command is +broken at a percentage sign, and the stuff that comes after this is +sent into the command's standard input. Furthermore, any output from +the command is mailed to the user. This functionality is provided for +compatibility with Vixie cron, but it is also available to scheme +configuration files. The command (with-mail-out action . user) can be +used to direct output from the action (which may be a procedure, list, +or string) into an e-mail to the user. + +In the case that the action is a string, then percentage signs are +processed as per the vixie specifications, and information is piped to +the shell command's standard input. + +@subsection Setting environment variables +@cindex environment variables in scheme +@cindex setting environment variables +@findex append-environment-mods +Also for compatibility with Vixie cron, mcron has the ability to set +environment variables in configuration files. To access this +functionality from a scheme configuration file, use the command +(append-environment-mods name value), where name is the name of an +environment variable, and value is the value put to it. A value of #f +will remove the variable from the environment. + +Note that environment modifications are accumulated as the +configuration file is processed, so when a job actually runs, its +environment will be modified according to the modifications specified +before the job specification in the configuration file. + + +@node Extended Guile examples, Vixie Syntax, Guile Syntax, Syntax +@section Extended Guile examples +@cindex examples, extended guile +@cindex extended guile examples +While Guile gives you flexibility to do anything, and the power to +represent complex requirements succinctly, things are not always as +they seem. The following examples illustrate some pitfalls, and +demonstrate how to code around them. + +@menu +* AT commands:: +* Every second Sunday:: +* Two hours every day:: +* Missing the first appointment:: +* Penultimate day of every month:: +@end menu + +@node AT commands, Every second Sunday, Extended Guile examples, Extended Guile examples +@subsection Synthesizing ``at'' commands +@cindex at command +The current implementation of mcron does not provide for an at command +(a command-line program that allows the user to specify that a job +runs exactly once at a certain time). This can, however, be achieved. + +Suppose the program @code{my-program} needs to be run at midnight +tonight. A Guile script like the following should work. FIXME: TEST +THIS EXAMPLE. + +@example +(define my-program-flag #t) + +(job (lambda (current-time) + (if my-program-flag + (begin + (set! my-program-flag #f) + (next-day-from current-time)) + 99999999)) + (lambda () (system "my-program") + (kill (getppid)))) +@end example + +@node Every second Sunday, Two hours every day, AT commands, Extended Guile examples +@subsection Every second Sunday +@cindex examples, every second sunday +To run @code{my-program} on the second Sunday of every month, a Guile +script like the following should suffice (it is left as an exercise to +the student to understand how this works!). FIXME: TEST THIS EXAMPLE. + +@example +(job (lambda (current-time) + (let* ((next-month (next-month-from current-time)) + (first-day (tm:wday (localtime next-month))) + (second-sunday (if (eqv? first-day 0) + 8 + (- 15 first-day)))) + (+ next-month (* 24 60 60 second-sunday)))) + "my-program") +@end example + + +@node Two hours every day, Missing the first appointment, Every second Sunday, Extended Guile examples +@subsection Two hours every day +@cindex examples, two hours every day +@cindex pitfalls, two hours every day +Surprisingly perhaps, the following will @strong{not} have the desired +effect. + +@example +(job '(next-hour-from (next-day) '(1 2)) + "my-program") +@end example + +Rather than running the my-program program at one o'clock and two +o'clock every day, it will only run it at one o'clock. This is because +each time mcron has to compute the next time to run the command, it +first obtains the next day, and then finds the earliest hour in that +day to run at. Thus, after running the command at one o'clock, the +program first skips forwards to the next midnight (missing the two +o'clock appointment), and then finds the next one o'clock schedule. + +The following simple command is the correct way to specify this +behaviour. + +@example +(job '(next-hour '(1 2)) "my-program") +@end example + + +@node Missing the first appointment, Penultimate day of every month, Two hours every day, Extended Guile examples +@subsection Missing the first appointment +@cindex examples, missing the first appointment +@cindex pitfalls, missing the first appointment +The command + +@example +(job '(next-hour-from (next-day) '(16)) + "my-program") +@end example + +will run @code{my-program} every day at four o'clock in the +afternoon. However, if mcron is started with this script at midday, +the first time the command will run will be four o'clock tomorrow; +today's appointment will be missed (one time only). + +The correct way to specify this requirement is simply + +@example +(job '(next-hour '(16)) + "my-program") +@end example + + +@node Penultimate day of every month, , Missing the first appointment, Extended Guile examples +@subsection Penultimate day of every month +@cindex examples, penultimate day of every month +The following will run the @code{my-program} program on the +second-to-last day of every month. + +@example +(job '(- (next-month-from (next-month)) (* 48 3600)) + "my-program") +@end example + + + +@node Vixie Syntax, , Extended Guile examples, Syntax +@section Vixie +@cindex syntax, vixie +@cindex vixie syntax +@cindex vixie definition +@cindex vixie compatibility +@cindex compatibility, vixie +@emph{NOTE} that this section is definitive. If there is a difference in +behaviour between the mcron program and this part of the manual, then +there is a bug in the program. This section is also copied verbatim +from Paul Dixie's documentation for his cron program, and his +copyright notice is duly reproduced below. + +@cindex /etc/crontab +@cindex system crontab +@cindex incompatibility +@cindex vixie incompatibility +There is one single exception to the above. @strong{Mcron does not +notice changes made to /etc/crontab}. If a change is made, then it is +necessary to kill the cron daemon and restart it for the change to +take effect. + +There are three problems with this specification. + +@cindex zero'th day of month +@cindex 0'th day of month +1. It is allowed to specify days of the month in the range 0-31. What +does it mean to specify day 0? Well, if I'm not mistaken mcron will +run the command on the last day of the previous month (but don't rely +on this). I don't know what Vixie cron would have done. + +@cindex thirteenth month of year +@cindex 13th month of year +2. Similarly to the above (but different), months of the year can be +specified in the range 0-12. In the case of mcron (don't know what +Vixie cron did) month 12 will cause the program to wait until January +of the following year (but don't rely on this). + +@cindex shell +@cindex environment variables, shell +@cindex /etc/passwd +3. Somewhere it says that cron sets the SHELL environment variable to +/bin/sh, and elsewhere it implies that the default behaviour is for +the user's default shell to be used to execute commands. Mcron sets +the variable and runs the command in the user's default shell, as +advertised by the /etc/passwd file. + +@menu +* Paul Dixie's copyright:: +* Crontab file:: +* Incompatibilities with old Unices:: +@end menu + + +@node Paul Dixie's copyright, Crontab file, Vixie Syntax, Vixie Syntax +@subsection Paul Dixie's copyright +@cindex copyright, Paul Dixie's +@cindex Paul Dixie's copyright +@quotation +Copyright 1988,1990,1993,1994 by Paul Vixie +All rights reserved + +Distribute freely, except: don't remove my name from the source or +documentation (don't take credit for my work), mark your changes (don't +get me blamed for your possible bugs), don't alter or remove this +notice. May be sold if buildable source is provided to buyer. No +warrantee of any kind, express or implied, is included with this +software; use at your own risk, responsibility for damages (if any) to +anyone resulting from the use of this software rests entirely with the +user. +@end quotation + + + + +@node Crontab file, Incompatibilities with old Unices, Paul Dixie's copyright, Vixie Syntax +@subsection Crontab files. +@cindex crontab file +@cindex vixie crontab file +A @code{crontab} file contains instructions to the @code{cron} daemon +of the general form: ``run this command at this time on this date''. +Each user has their own crontab, and commands in any given crontab +will be executed as the user who owns the crontab. Uucp and News will +usually have their own crontabs, eliminating the need for explicitly +running @code{su} as part of a cron command. + +@cindex comments, vixie-style +Blank lines and leading spaces and tabs are ignored. Lines whose first +non-space character is a pound-sign (#) are comments, and are ignored. +Note that comments are not allowed on the same line as cron commands, since +they will be taken to be part of the command. Similarly, comments are not +allowed on the same line as environment variable settings. + +An active line in a crontab will be either an environment setting or a cron +command. An environment setting is of the form, + +@cindex environment setting, vixie-style +@example +name = value +@end example + +where the spaces around the equal-sign (=) are optional, and any +subsequent non-leading spaces in @code{value} will be part of the +value assigned to @code{name}. The @code{value} string may be placed +in quotes (single or double, but matching) to preserve leading or +trailing blanks. + +@cindex environment variables, SHELL +@cindex environment variables, LOGNAME +@cindex environment variables, HOME +@cindex SHELL environment variable +@cindex LOGNAME environment variable +@cindex HOME environment variable +@cindex /etc/passwd +Several environment variables are set up automatically by the +@code{cron} daemon. SHELL is set to /bin/sh, and LOGNAME and HOME are +set from the /etc/passwd line of the crontab's owner. HOME and SHELL +may be overridden by settings in the crontab; LOGNAME may not. + +@cindex environment variables, USER +@cindex USER environment variable +@cindex BSD +(Another note: the LOGNAME variable is sometimes called USER on BSD systems... +on these systems, USER will be set also.) @footnote{mcron has not been +ported to BSD, so these notes are not relevant.} + +@cindex environment variables, MAILTO +@cindex MAILTO environment variable +In addition to LOGNAME, HOME, and SHELL, @code{cron} will look at +MAILTO if it has any reason to send mail as a result of running +commands in ``this'' crontab. If MAILTO is defined (and non-empty), +mail is sent to the user so named. If MAILTO is defined but empty +(MAILTO=""), no mail will be sent. Otherwise mail is sent to the +owner of the crontab. This option is useful if you decide on +/bin/mail instead of /usr/lib/sendmail as your mailer when you install +cron -- /bin/mail doesn't do aliasing, and UUCP usually doesn't read +its mail. + +The format of a cron command is very much the V7 standard, with a number of +upward-compatible extensions. Each line has five time and date fields, +followed by a user name if this is the system crontab file, +followed by a command. Commands are executed by @code{cron} +when the minute, hour, and month of year fields match the current +time, @strong{and} when at least one of the two day fields (day of month, or day of week) +match the current time (see ``Note'' below). @code{cron} examines cron entries once every minute. +The time and date fields are: + +@cindex vixie time specification fields +@cindex fields, vixie time specification +@multitable @columnfractions .2 .5 +@item Field @tab Allowed values +@item ----- @tab -------------- +@item minute @tab 0-59 +@item hour @tab 0-23 +@item day of month @tab 0-31 +@item month @tab 0-12 (or names, see below) +@item day of week @tab 0-7 (0 or 7 is Sun, or use names) +@end multitable + +A field may be an asterisk (*), which always stands for ``first-last''. + +@cindex ranges in vixie time specifications +Ranges of numbers are allowed. Ranges are two numbers separated +with a hyphen. The specified range is inclusive. For example, +8-11 for an ``hours'' entry specifies execution at hours 8, 9, 10 +and 11. + +@cindex lists in vixie time specifications +Lists are allowed. A list is a set of numbers (or ranges) +separated by commas. Examples: ``1,2,5,9'', ``0-4,8-12''. + +@cindex steps in vixie time specifications +Step values can be used in conjunction with ranges. Following +a range with ``/<number>'' specifies skips of the number's value +through the range. For example, ``0-23/2'' can be used in the hours +field to specify command execution every other hour (the alternative +in the V7 standard is ``0,2,4,6,8,10,12,14,16,18,20,22''). Steps are +also permitted after an asterisk, so if you want to say ``every two +hours'', just use ``*/2''. + +@cindex names in vixie-style time specifications +Names can also be used for the ``month'' and ``day of week'' +fields. Use the first three letters of the particular +day or month (case doesn't matter). Ranges or +lists of names are not allowed. @footnote{Mcron allows any alphabetic +characters after a name, so full names of days or months are also valid.} + +@cindex % character on vixie-style commands +@cindex standard input, vixie-style +The ``sixth'' field (the rest of the line) specifies the command to be +run. +The entire command portion of the line, up to a newline or % +character, will be executed by /bin/sh or by the shell +specified in the SHELL variable of the cronfile. +Percent-signs (%) in the command, unless escaped with backslash +(\\), will be changed into newline characters, and all data +after the first % will be sent to the command as standard +input. + +@cindex day specification, vixie-style +@cindex vixie-style day specification +Note: The day of a command's execution can be specified by two +fields -- day of month, and day of week. If both fields are +restricted (ie, aren't *), the command will be run when +@emph{either} +field matches the current time. For example, + +``30 4 1,15 * 5'' + +would cause a command to be run at 4:30 am on the 1st and 15th of each +month, plus every Friday. + +EXAMPLE CRON FILE + +@example +# use /bin/sh to run commands, no matter what /etc/passwd says +SHELL=/bin/sh +# mail any output to `paul', no matter whose crontab this is +MAILTO=paul +# +# run five minutes after midnight, every day +5 0 * * * $HOME/bin/daily.job >> $HOME/tmp/out 2>&1 +# run at 2:15pm on the first of every month -- output mailed to paul +15 14 1 * * $HOME/bin/monthly +# run at 10 pm on weekdays, annoy Joe +0 22 * * 1-5 mail -s "It's 10pm" joe%Joe,%%Where are your kids?% +23 0-23/2 * * * echo "run 23 minutes after midn, 2am, 4am ..., everyday" +5 4 * * sun echo "run at 5 after 4 every sunday" +@end example + +@node Incompatibilities with old Unices, , Crontab file, Vixie Syntax +@subsection Extensions and incompatibilities. +@cindex incompatibilities with old Unices +@cindex extensions, vixie over old Unices +This section lists differences between Paul Vixie's cron and the +olde-worlde BSD and AT&T programs, for the benefit of system +administrators and users who are upgrading all the way. + +@itemize @bullet +@item +@cindex day 7 +When specifying day of week, both day 0 and day 7 will be considered Sunday. +BSD and AT&T seem to disagree about this. + +@item +Lists and ranges are allowed to co-exist in the same field. "1-3,7-9" would +be rejected by AT&T or BSD cron -- they want to see "1-3" or "7,8,9" ONLY. + +@item +Ranges can include "steps", so "1-9/2" is the same as "1,3,5,7,9". + +@item +Names of months or days of the week can be specified by name. + +@item +Environment variables can be set in the crontab. In BSD or AT&T, the +environment handed to child processes is basically the one from /etc/rc. + +@item +Command output is mailed to the crontab owner (BSD can't do this), can be +mailed to a person other than the crontab owner (SysV can't do this), or the +feature can be turned off and no mail will be sent at all (SysV can't do this +either). + +@end itemize + + +@node Invoking, Index, Syntax, Top +@chapter Detailed invoking +@cindex invoking +@cindex personality +@cindex mcron program +@cindex cron program +@cindex crond program +@cindex crontab program +The program adopts one of three different personalities depending on +the name used to invoke it. In a standard installation, the program is +installed in the system under the names mcron, cron and crontab +(installed SUID). + +The recommended way to invoke the program is via the mcron personality +described in the next section. The program can also be run as cron by +root, and by the SUID program crontab by individual users to gain +backwards compatibility with Vixie cron. However, due to the fact that +this daemon process is shared by, and under control of, all the users +of the system it is possible (though very unlikely) that it may become +unusable, hence the recommendation to use the mcron personality. + +@cindex deprecated, vixie personality +Furthermore, the Vixie personality is considered deprecated by this +author (it offers not a single advantage over the mcron personality, +and bloats the code by a factor of three). It is unlikely that this +personality will ever actually go away, but the program may in future +be split into two distinct parts, and new developments will only take +place in the part which implements the mcron personality. + + + +@menu +* Running mcron:: +* Running cron or crond:: +* Running crontab:: +* Exit codes:: +@end menu + +@node Running mcron, Running cron or crond, Invoking, Invoking +@section Running mcron +@cindex invoking mcron +@cindex mcron options +@cindex mcron arguments +@cindex command line, mcron +@cindex mcron command line +Mcron should be run by the user who wants to schedule his jobs. It may +be made a background job using the facilities of the shell. The basic +command is +@code{mcron [OPTION ...] [file ...]} +which has the effect of reading all the configuration files specified +(subject to the options) and then waiting until it is time to execute +some command. If no files are given on the command line, then mcron +will look in the user's ~/.cron directory. In either case, files which +end in the extension .vixie or .vix will be assumed to contain +Vixie-style crontabs, and files ending .guile or .gle will be assumed +to contain scheme code and will be executed as such. + +The program accepts the following options. + +@table @option +@item -s [count] +@itemx --schedule[=count] +@cindex printout of jobs schedule +@cindex schedule of jobs, listing +@cindex options, schedule +@cindex options, -s +@cindex -s option +@cindex --schedule option +With this option specified no commands are run. Instead, the program +computes the times the commands would be run and prints the +information to the screen, and then immediately exits. + +The count, if supplied, indicates the number of commands to +display. The default value is 8. + +@cindex daemon option +@cindex options, daemon +@cindex options, -d +@cindex -d option +@cindex --daemon option +@item -d +@itemx --daemon +With this option the program will detach itself from the controlling +terminal and run as a daemon process. + +@cindex stdin option +@cindex options, stdin +@cindex options, -i +@cindex -i option +@cindex --stdin option +@cindex standard input, configuring from +@cindex configuring from standard input +@item -i (vixie|guile) +@itemx --stdin=(vixie|guile) +This option is used to indicate whether the configuration information +being passed on the standard input is in Vixie format or Guile +format. Guile is the default. + +@cindex -v option +@cindex --version option +@cindex options, -v +@cindex options, version +@item -v +@itemx --version +This option causes a message to be printed on the standard output with +information about the version and copyright for the current program. + +@cindex -h option +@cindex --help option +@cindex options, -h +@cindex options, --help +@item -h +@itemx --help +This causes a short but complete usage message to be displayed on +standard output. + +@end table + +@node Running cron or crond, Running crontab, Running mcron, Invoking +@section Running cron or crond +@cindex cron, invokation +@cindex running cron +@cindex crond, invokation +@cindex running crond +@cindex /var/cron/tabs +@cindex /var/run/cron.pid +If the program runs by the name of cron or crond, then it will read +all the files in /var/cron/tabs (which should only be readable by +root) and the file /etc/crontab, and then detaches itself from the +terminal to live forever as a daemon process. Additionally, it puts +its PID into /var/run/cron.pid, and listens for SIGHUPs, in which case +it will look for a file /var/cron/update which should contain a single +username, and the program will re-read that user's crontab. This is +for correct functioning with the crontab program. + +@cindex /etc/crontab +@cindex incompatibility +@strong{NOTE} that it does not detect changes in /etc/crontab; if this file +is ever changed then it will be necessary to kill and then restart the +daemon. This is the one and only incompatibility with Vixie's cron +program. + +The options which may be used with this program are as follows. + +@table @option + +@cindex -v option +@cindex --version option +@cindex options, -v +@cindex options, version +@item -v +@itemx --version +This option causes a message to be printed on the standard output with +information about the version and copyright for the current program. + +@cindex -h option +@cindex --help option +@cindex options, -h +@cindex options, --help +@item -h +@itemx --help +This causes a short but complete usage message to be displayed on +standard output. + +@end table + +@node Running crontab, Exit codes, Running cron or crond, Invoking +@section Running crontab +@cindex crontab, invoking +@cindex running crontab +This program is run by individual users to inspect or modify their +crontab files. If a change is made to the file, then the root daemon +process will be given a kick, and will immediately read the new +configuration. A warning will be issued to standard output if it +appears that a cron daemon is not running. + +The command is used as + +@code{crontab [-u user] file} + +or + +@code{crontab [-u user] ( -l | -e | -r )} + +Only the root user can use the -u option, to specify the manipulation +of another user's crontab file. In the first instance, the entire +crontab file of the user is replaced with the contents of the +specified file, or standard input if the file is ``-''. + +In the latter case, the program behaves according to which of the +(mutually exclusive) options was given (note that the long options are +an mcron extension). + +@table @option + +@cindex -l option +@cindex list option, crontab +@cindex options, -l +@cindex options, --list +@cindex viewing a crontab +@cindex listing a crontab +@item -l +@itemx --list +Print the user's crontab file to the standard output, and exit. + +@cindex -r option +@cindex remove option +@cindex options, -r +@cindex options, --remove +@cindex deleting a crontab +@cindex removing a crontab +@item -r +@item --remove +Delete the user's crontab file, and exit. + +@cindex -e option +@cindex edit option +@cindex options, -e +@cindex options, --edit +@cindex editing a crontab +@cindex creating a crontab +@item -e +@item --edit +Using the editor specified in the user's VISUAL or EDITOR environment +variables, allow the user to edit his crontab. Once the user exits the +editor, the crontab is checked for parseability, and if it is okay +then it is installed as the user's new crontab and the daemon is +notified that a change has taken place, so that the new file will +become immediately effective. + +@end table + +@node Exit codes, , Running crontab, Invoking +@section Exit codes +@cindex exit codes +@cindex error conditions +@cindex errors +The following are the status codes returned to the operating system +when the program terminates. + +@table @asis +@item 0 +No problems. + +@item 1 +An attempt has been made to start cron but there is already a +/var/run/cron.pid file. If there really is no other cron daemon +running (this does not include invokations of mcron) then you should +remove this file before attempting to run cron. + +@item 2 +In parsing a guile configuration file, a @code{job} command has been +seen but the second argument is neither a procedure, list or +string. This argument is the job's action, and needs to be specified +in one of these forms. + +@item 3 +In parsing a guile configuration file, a @code{job} command has been +seen but the first argument is neither a procedure, list or +string. This argument is the job's next-time specification, and needs +to be specified in one of these forms. + +@item 4 +An attempt to run cron has been made by a user who does not have +permission to access the crontabs in /var/cron/tabs. These files +should be readable only by root, and the cron daemon must be run as +root. + +@item 5 +An attempt to run mcron has been made, but there are no jobs to +schedule! + +@item 6 +The system administrator has blocked this user from using crontab with +the files /var/cron/allow and /var/cron/deny. + +@item 7 +Crontab has been run with more than one of the arguments @code{-l}, +@code{-r}, @code{-e}. These are mutually exclusive options. + +@item 8 +Crontab has been run with the -u option by a user other than +root. Only root is allowed to use this option. + +@item 9 +An invalid vixie-style time specification has been supplied. + +@item 10 +An invalid vixie-style job specification has been supplied. + +@item 11 +A bad line has been seen in /etc/crontab. + +@item 12 +The last component of the name of the program was not one of +@code{mcron}, @code{cron}, @code{crond} or @code{crontab}. + +@item 13 +Either the ~/.cron directory does not exist, or there is a problem +reading the files there. + +@item 14 +There is a problem writing to /var/cron/update. This is probably +because the crontab program is not installed SUID root, as it should +be. + +@item 15 +Crontab has been run without any arguments at all. There is no default +behaviour in this case. + +@item 16 +Cron has been run by a user other than root. + +@end table + + + +@node Index, , Invoking, Top +@unnumbered Index + +@printindex cp + +@bye |