From 995bc9ca6ebf6880d7e7e6f3d1baa2941758fc47 Mon Sep 17 00:00:00 2001 From: Mathieu Lirzin Date: Sat, 7 May 2016 11:09:44 +0200 Subject: all: Rename 'scm' directory to 'src'. * scm/mcron/config.scm.in: Rename to ... * src/mcron/config.scm.in: ... this. * scm/mcron/crontab.scm: Rename to ... * src/mcron/crontab.scm: ... this. * scm/mcron/environment.scm: Rename to ... * src/mcron/environment.scm: ... this. * scm/mcron/job-specifier.scm: Rename to ... * src/mcron/job-specifier.scm: ... this. * scm/mcron/main.scm: Rename to ... * src/mcron/main.scm: ... this. * scm/mcron/mcron-core.scm: Rename to ... * src/mcron/mcron-core.scm: ... this. * scm/mcron/redirect.scm: Rename to ... * src/mcron/redirect.scm: ... this. * scm/mcron/vixie-specification.scm: Rename to ... * src/mcron/vixie-specification.scm: ... this. * scm/mcron/vixie-time.scm: Rename to ... * src/mcron/vixie-time.scm: ... this. * mcron.c: Rename to ... * src/mcron.c: ... this. * Makefile.am: Adapt to them. * build-aux/pre-inst-env.in: Likewise. * configure.ac (AC_CONFIG_FILES): Likewise. (AC_CONFIG_HEADER): Set to 'src/config.h'. * .gitignore: Update. --- scm/mcron/config.scm.in | 39 ---- scm/mcron/crontab.scm | 228 ---------------------- scm/mcron/environment.scm | 97 --------- scm/mcron/job-specifier.scm | 253 ------------------------ scm/mcron/main.scm | 401 -------------------------------------- scm/mcron/mcron-core.scm | 270 ------------------------- scm/mcron/redirect.scm | 190 ------------------ scm/mcron/vixie-specification.scm | 207 -------------------- scm/mcron/vixie-time.scm | 384 ------------------------------------ 9 files changed, 2069 deletions(-) delete mode 100644 scm/mcron/config.scm.in delete mode 100644 scm/mcron/crontab.scm delete mode 100644 scm/mcron/environment.scm delete mode 100644 scm/mcron/job-specifier.scm delete mode 100644 scm/mcron/main.scm delete mode 100644 scm/mcron/mcron-core.scm delete mode 100644 scm/mcron/redirect.scm delete mode 100644 scm/mcron/vixie-specification.scm delete mode 100644 scm/mcron/vixie-time.scm (limited to 'scm') diff --git a/scm/mcron/config.scm.in b/scm/mcron/config.scm.in deleted file mode 100644 index db2bc32..0000000 --- a/scm/mcron/config.scm.in +++ /dev/null @@ -1,39 +0,0 @@ -;; -*-scheme-*- - -;; Copyright (C) 2015 Mathieu Lirzin -;; Copyright (C) 2003 Dale Mellor -;; -;; This file is part of GNU mcron. -;; -;; GNU mcron is free software: you can redistribute it and/or modify it under -;; the terms of the GNU General Public License as published by the Free -;; Software Foundation, either version 3 of the License, or (at your option) -;; any later version. -;; -;; GNU mcron is distributed in the hope that it will be useful, but WITHOUT -;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -;; FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -;; more details. -;; -;; You should have received a copy of the GNU General Public License along -;; with GNU mcron. If not, see . - - -;; Some constants set by the configuration process. - -(define-module (mcron config)) - -(define-public config-debug @CONFIG_DEBUG@) -(define-public config-package-name "@PACKAGE_NAME@") -(define-public config-package-version "@PACKAGE_VERSION@") -(define-public config-package-string "@PACKAGE_STRING@") -(define-public config-package-bugreport "@PACKAGE_BUGREPORT@") -(define-public config-package-url "@PACKAGE_URL@") -(define-public config-sendmail "@SENDMAIL@") - -(define-public config-spool-dir "@CONFIG_SPOOL_DIR@") -(define-public config-socket-file "@CONFIG_SOCKET_FILE@") -(define-public config-allow-file "@CONFIG_ALLOW_FILE@") -(define-public config-deny-file "@CONFIG_DENY_FILE@") -(define-public config-pid-file "@CONFIG_PID_FILE@") -(define-public config-tmp-dir "@CONFIG_TMP_DIR@") diff --git a/scm/mcron/crontab.scm b/scm/mcron/crontab.scm deleted file mode 100644 index 6be5c61..0000000 --- a/scm/mcron/crontab.scm +++ /dev/null @@ -1,228 +0,0 @@ -;; Copyright (C) 2003, 2014 Dale Mellor -;; -;; This file is part of GNU mcron. -;; -;; GNU mcron is free software: you can redistribute it and/or modify it under -;; the terms of the GNU General Public License as published by the Free -;; Software Foundation, either version 3 of the License, or (at your option) -;; any later version. -;; -;; GNU mcron is distributed in the hope that it will be useful, but WITHOUT -;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -;; FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -;; more details. -;; -;; You should have received a copy of the GNU General Public License along -;; with GNU mcron. If not, see . - - -;; Apart from the collecting of options and the handling of --help and --version -;; (which are done in the main.scm file), this file provides all the -;; functionality of the crontab personality. It is designed to be loaded and run -;; once, and then the calling program can exit and the crontab program will have -;; completed its function. - - - -;; Procedure to communicate with running cron daemon that a user has modified -;; his crontab. The user name is written to the /var/cron/socket UNIX socket. - -(let ((hit-server - (lambda (user-name) - (catch #t (lambda () - (let ((socket (socket AF_UNIX SOCK_STREAM 0))) - (connect socket AF_UNIX config-socket-file) - (display user-name socket) - (close socket))) - (lambda (key . args) - (display "Warning: a cron daemon is not running.\n"))))) - - - -;; Procedure to scan a file containing one user name per line (such as -;; /var/cron/allow and /var/cron/deny), and determine if the given name is in -;; there. The procedure returns #t, #f, or '() if the file does not exist. - - (in-access-file? - (lambda (file name) - (catch #t (lambda () - (with-input-from-file - file - (lambda () - (let loop ((input (read-line))) - (if (eof-object? input) - #f - (if (string=? input name) - #t - (loop (read-line)))))))) - (lambda (key . args) '())))) - - - - ;; This program should have been installed SUID root. Here we get the - ;; passwd entry for the real user who is running this program. - - (crontab-real-user (passwd:name (getpw (getuid))))) - - - - ;; If the real user is not allowed to use crontab due to the /var/cron/allow - ;; and/or /var/cron/deny files, bomb out now. - - (if (or (eq? (in-access-file? config-allow-file crontab-real-user) #f) - (eq? (in-access-file? config-deny-file crontab-real-user) #t)) - (mcron-error 6 "Access denied by system operator.")) - - - - ;; Check that no more than one of the mutually exclusive options are being - ;; used. - - (if (> (+ (if (option-ref options 'edit #f) 1 0) - (if (option-ref options 'list #f) 1 0) - (if (option-ref options 'remove #f) 1 0)) - 1) - (mcron-error 7 "Only one of options -e, -l or -r can be used.")) - - - - ;; Check that a non-root user is trying to read someone else's files. - - (if (and (not (eqv? (getuid) 0)) - (option-ref options 'user #f)) - (mcron-error 8 "Only root can use the -u option.")) - - - - (let ( - - - ;; Iff the --user option is given, the crontab-user may be different - ;; from the real user. - - (crontab-user (option-ref options 'user crontab-real-user)) - - - ;; So now we know which crontab file we will be manipulating. - - (crontab-file (string-append config-spool-dir "/" crontab-user)) - - - - ;; Display the prompt and wait for user to type his choice. Return #t if - ;; the answer begins with 'y' or 'Y', return #f if it begins with 'n' or - ;; 'N', otherwise ask again. - - (get-yes-no (lambda (prompt . re-prompt) - (if (not (null? re-prompt)) - (display "Please answer y or n.\n")) - (display (string-append prompt " ")) - (let ((r (read-line))) - (if (not (string-null? r)) - (case (string-ref r 0) - ((#\y #\Y) #t) - ((#\n #\N) #f) - (else (get-yes-no prompt #t))) - (get-yes-no prompt #t)))))) - - - - ;; There are four possible sub-personalities to the crontab personality: - ;; list, remove, edit and replace (when the user uses no options but - ;; supplies file names on the command line). - - (cond - - - ;; In the list personality, we simply open the crontab and copy it - ;; character-by-character to the standard output. If anything goes wrong, it - ;; can only mean that this user does not have a crontab file. - - ((option-ref options 'list #f) - (catch #t (lambda () - (with-input-from-file crontab-file (lambda () - (do ((input (read-char) (read-char))) - ((eof-object? input)) - (display input))))) - (lambda (key . args) - (display (string-append "No crontab for " - crontab-user - " exists.\n"))))) - - - ;; In the edit personality, we determine the name of a temporary file and an - ;; editor command, copy an existing crontab file (if it is there) to the - ;; temporary file, making sure the ownership is set so the real user can edit - ;; it; once the editor returns we try to read the file to check that it is - ;; parseable (but do nothing more with the configuration), and if it is okay - ;; (this program is still running!) we move the temporary file to the real - ;; crontab, wake the cron daemon up, and remove the temporary file. If the - ;; parse fails, we give user a choice of editing the file again or quitting - ;; the program and losing all changes made. - - ((option-ref options 'edit #f) - (let ((temp-file (string-append config-tmp-dir - "/crontab." - (number->string (getpid))))) - (catch #t (lambda () (copy-file crontab-file temp-file)) - (lambda (key . args) (with-output-to-file temp-file noop))) - (chown temp-file (getuid) (getgid)) - (let retry () - (system (string-append - (or (getenv "VISUAL") (getenv "EDITOR") "vi") - " " - temp-file)) - (catch 'mcron-error - (lambda () (read-vixie-file temp-file)) - (lambda (key exit-code . msg) - (apply mcron-error 0 msg) - (if (get-yes-no "Edit again?") - (retry) - (begin - (mcron-error 0 "Crontab not changed") - (primitive-exit 0)))))) - (copy-file temp-file crontab-file) - (delete-file temp-file) - (hit-server crontab-user))) - - - ;; In the remove personality we simply make an effort to delete the crontab and - ;; wake the daemon. No worries if this fails. - - ((option-ref options 'remove #f) - (catch #t (lambda () (delete-file crontab-file) - (hit-server crontab-user)) - noop)) - - - ;; !!!! This comment is wrong. - - ;; In the case of the replace personality we loop over all the arguments on the - ;; command line, and for each one parse the file to make sure it is parseable - ;; (but subsequently ignore the configuration), and all being well we copy it - ;; to the crontab location; we deal with the standard input in the same way but - ;; different. :-) In either case the server is woken so that it will read the - ;; newly installed crontab. - - ((not (null? (option-ref options '() '()))) - (let ((input-file (car (option-ref options '() '())))) - (catch-mcron-error - (if (string=? input-file "-") - (let ((input-string (stdin->string))) - (read-vixie-port (open-input-string input-string)) - (with-output-to-file crontab-file (lambda () - (display input-string)))) - (begin - (read-vixie-file input-file) - (copy-file input-file crontab-file)))) - (hit-server crontab-user))) - - - ;; The user is being silly. The message here is identical to the one Vixie cron - ;; used to put out, for total compatibility. - - (else (mcron-error 15 - "usage error: file name must be specified for replace."))) - - -)) ;; End of file-level let-scopes. diff --git a/scm/mcron/environment.scm b/scm/mcron/environment.scm deleted file mode 100644 index b563d55..0000000 --- a/scm/mcron/environment.scm +++ /dev/null @@ -1,97 +0,0 @@ -;; Copyright (C) 2015, 2016 Mathieu Lirzin -;; Copyright (C) 2003 Dale Mellor -;; -;; This file is part of GNU mcron. -;; -;; GNU mcron is free software: you can redistribute it and/or modify it under -;; the terms of the GNU General Public License as published by the Free -;; Software Foundation, either version 3 of the License, or (at your option) -;; any later version. -;; -;; GNU mcron is distributed in the hope that it will be useful, but WITHOUT -;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -;; FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -;; more details. -;; -;; You should have received a copy of the GNU General Public License along -;; with GNU mcron. If not, see . - - - -;; This file defines the variable current-environment-mods, and the procedures -;; append-environment-mods (which is available to user configuration files), -;; clear-environment-mods and modify-environment. The idea is that the -;; current-environment-mods is a list of pairs of environment names and values, -;; and represents the cumulated environment settings in a configuration -;; file. When a job definition is seen in a configuration file, the -;; current-environment-mods are copied into the internal job description, and -;; when the job actually runs these environment modifications are applied to -;; the UNIX environment in which the job runs. - - - - -(define-module (mcron environment) - #:export (modify-environment - clear-environment-mods - append-environment-mods - get-current-environment-mods-copy)) - - - -;; As we parse configuration files, we build up an alist of environment -;; variables here. - -(define current-environment-mods '()) - - - -;; Each time a job is added to the system, we take a snapshot of the current -;; set of environment modifiers. - -(define (get-current-environment-mods-copy) - (list-copy current-environment-mods)) - - - -;; When we start to parse a new configuration file, we want to start with a -;; fresh environment (actually an umodified version of the pervading mcron -;; environment). - -(define (clear-environment-mods) - (set! current-environment-mods '())) - - - -;; Procedure to add another environment setting to the alist above. This is -;; used both implicitly by the Vixie parser, and can be used directly by users -;; in scheme configuration files. The return value is purely for the -;; convenience of the parse-vixie-environment in the vixie-specification module -;; (yuk). - -(define (append-environment-mods name value) - (set! current-environment-mods (append current-environment-mods - (list (cons name value)))) - #t) - -(define (modify-environment env passwd-entry) - "Modify the environment (in the UNIX sense) by setting the variables from -ENV and some default ones which are modulated by PASSWD-ENTRY. \"LOGNAME\" -and \"USER\" environment variables can't be overided by ENV. ENV must be an -alist which associate environment variables to their value. PASSWD-ENTRY must -be an object representing user information which corresponds to a valid entry -in /etc/passwd. The return value is not specified." - (for-each (lambda (pair) (setenv (car pair) (cdr pair))) - (let ((home-dir (passwd:dir passwd-entry)) - (user-name (passwd:name passwd-entry))) - (append - ;; Default environment variables which can be overided by ENV. - `(("HOME" . ,home-dir) - ("CWD" . ,home-dir) - ("SHELL" . ,(passwd:shell passwd-entry)) - ("TERM" . #f) - ("TERMCAP" . #f)) - env - ;; Environment variables with imposed values. - `(("LOGNAME" . ,user-name) - ("USER" . ,user-name)))))) diff --git a/scm/mcron/job-specifier.scm b/scm/mcron/job-specifier.scm deleted file mode 100644 index 1c2f9d9..0000000 --- a/scm/mcron/job-specifier.scm +++ /dev/null @@ -1,253 +0,0 @@ -;; Copyright (C) 2003 Dale Mellor -;; Copyright (C) 2016 Mathieu Lirzin -;; -;; This file is part of GNU mcron. -;; -;; GNU mcron is free software: you can redistribute it and/or modify it under -;; the terms of the GNU General Public License as published by the Free -;; Software Foundation, either version 3 of the License, or (at your option) -;; any later version. -;; -;; GNU mcron is distributed in the hope that it will be useful, but WITHOUT -;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -;; FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -;; more details. -;; -;; You should have received a copy of the GNU General Public License along -;; with GNU mcron. If not, see . - - - -;; This module defines all the functions that can be used by scheme mcron -;; configuration files, namely the procedures for working out next times, the -;; job procedure for registering new jobs (actually a wrapper around the core -;; add-job function), and the procedure for declaring environment modifications. - -(define-module (mcron job-specifier) - #:use-module (ice-9 match) - #:use-module (mcron core) - #:use-module (mcron environment) - #:use-module (mcron vixie-time) - #:use-module (srfi srfi-1) - #:use-module (srfi srfi-26) - #:re-export (append-environment-mods) - #:export (range - next-year-from next-year - next-month-from next-month - next-day-from next-day - next-hour-from next-hour - next-minute-from next-minute - next-second-from next-second - set-configuration-user - set-configuration-time - job)) - -(define* (range start end #:optional (step 1)) - "Produces a list of values from START up to (but not including) END. An -optional STEP may be supplied, and (if positive) only every step'th value will -go into the list. For example, (range 1 6 2) returns '(1 3 5)." - (unfold (cut >= <> end) identity (cute + <> (max step 1)) start)) - -(define (%find-best-next current next-list) - ;; Takes a value and a list of possible next values (all assumed less than - ;; 9999). It returns a pair consisting of the smallest element of the - ;; NEXT-LIST, and the smallest element larger than the CURRENT value. If an - ;; example of the latter cannot be found, 9999 will be returned. - (let loop ((smallest 9999) (closest+ 9999) (lst next-list)) - (match lst - (() (cons smallest closest+)) - ((time . rest) - (loop (min time smallest) - (if (> time current) (min time closest+) closest+) - rest))))) - -;; Internal function to return the time corresponding to some near future -;; hour. If hour-list is not supplied, the time returned corresponds to the -;; start of the next hour of the day. -;; -;; If the hour-list is supplied the time returned corresponds to the first hour -;; of the day in the future which is contained in the list. If all the values in -;; the list are less than the current hour, then the time returned will -;; correspond to the first hour in the list *on the following day*. -;; -;; ... except that the function is actually generalized to deal with seconds, -;; minutes, etc., in an obvious way :-) -;; -;; Note that value-list always comes from an optional argument to a procedure, -;; so is wrapped up as the first element of a list (i.e. it is a list inside a -;; list). - -(define (bump-time time value-list component higher-component - set-component! set-higher-component!) - (if (null? value-list) - (set-component! time (+ (component time) 1)) - (let ((best-next (%find-best-next (component time) (car value-list)))) - (if (eqv? 9999 (cdr best-next)) - (begin - (set-higher-component! time (+ (higher-component time) 1)) - (set-component! time (car best-next))) - (set-component! time (cdr best-next))))) - (car (mktime time))) - - - - -;; Set of configuration methods which use the above general function to bump -;; specific components of time to the next legitimate value. In each case, all -;; the components smaller than that of interest are taken to zero, so that for -;; example the time of the next year will be the time at which the next year -;; actually starts. - -(define (next-year-from current-time . year-list) - (let ((time (localtime current-time))) - (set-tm:mon time 0) - (set-tm:mday time 1) - (set-tm:hour time 0) - (set-tm:min time 0) - (set-tm:sec time 0) - (bump-time time year-list tm:year tm:year set-tm:year set-tm:year))) - -(define (next-month-from current-time . month-list) - (let ((time (localtime current-time))) - (set-tm:mday time 1) - (set-tm:hour time 0) - (set-tm:min time 0) - (set-tm:sec time 0) - (bump-time time month-list tm:mon tm:year set-tm:mon set-tm:year))) - -(define (next-day-from current-time . day-list) - (let ((time (localtime current-time))) - (set-tm:hour time 0) - (set-tm:min time 0) - (set-tm:sec time 0) - (bump-time time day-list tm:mday tm:mon set-tm:mday set-tm:mon))) - -(define (next-hour-from current-time . hour-list) - (let ((time (localtime current-time))) - (set-tm:min time 0) - (set-tm:sec time 0) - (bump-time time hour-list tm:hour tm:mday set-tm:hour set-tm:mday))) - -(define (next-minute-from current-time . minute-list) - (let ((time (localtime current-time))) - (set-tm:sec time 0) - (bump-time time minute-list tm:min tm:hour set-tm:min set-tm:hour))) - -(define (next-second-from current-time . second-list) - (let ((time (localtime current-time))) - (bump-time time second-list tm:sec tm:min set-tm:sec set-tm:min))) - - - -;; The current-action-time is the time a job was last run, the time from which -;; the next time to run a job must be computed. (When the program is first run, -;; this time is set to the configuration time so that jobs run from that moment -;; forwards.) Once we have this, we supply versions of the time computation -;; commands above which implicitly assume this value. - -(define current-action-time 0) - - - -;; We want to provide functions which take a single optional argument (as well -;; as implicitly the current action time), but unlike usual scheme behaviour if -;; the argument is missing we want to act like it is really missing, and if it -;; is there we want to act like it is a genuine argument, not a list of -;; optionals. - -(define (maybe-args function args) - (if (null? args) - (function current-action-time) - (function current-action-time (car args)))) - - - -;; These are the convenience functions we were striving to define for the -;; configuration files. They are wrappers for the next-X-from functions above, -;; but implicitly use the current-action-time for the time argument. - -(define (next-year . args) (maybe-args next-year-from args)) -(define (next-month . args) (maybe-args next-month-from args)) -(define (next-day . args) (maybe-args next-day-from args)) -(define (next-hour . args) (maybe-args next-hour-from args)) -(define (next-minute . args) (maybe-args next-minute-from args)) -(define (next-second . args) (maybe-args next-second-from args)) - - - -;; The default user for running jobs is the current one (who invoked this -;; program). There are exceptions: when cron parses /etc/crontab the user is -;; specified on each individual line; when cron parses /var/cron/tabs/* the user -;; is derived from the filename of the crontab. These cases are dealt with by -;; mutating this variable. Note that the variable is only used at configuration -;; time; a UID is stored with each job and it is that which takes effect when -;; the job actually runs. - -(define configuration-user (getpw (getuid))) -(define configuration-time (current-time)) - -(define (set-configuration-user user) - (set! configuration-user (if (or (string? user) - (integer? user)) - (getpw user) - user))) -(define (set-configuration-time time) (set! configuration-time time)) - - - -;; The job function, available to configuration files for adding a job rule to -;; the system. -;; -;; Here we must 'normalize' the next-time-function so that it is always a lambda -;; function which takes one argument (the last time the job ran) and returns a -;; single value (the next time the job should run). If the input value is a -;; string this is parsed as a Vixie-style time specification, and if it is a -;; list then we arrange to eval it (but note that such lists are expected to -;; ignore the function parameter - the last run time is always read from the -;; current-action-time global variable). A similar normalization is applied to -;; the action. -;; -;; Here we also compute the first time that the job is supposed to run, by -;; finding the next legitimate time from the current configuration time (set -;; right at the top of this program). - -(define (job time-proc action . displayable) - (let ((action (cond ((procedure? action) action) - ((list? action) (lambda () (primitive-eval action))) - ((string? action) (lambda () (system action))) - (else - (throw 'mcron-error 2 - "job: invalid second argument (action; should be lambda " - "function, string or list)")))) - - (time-proc - (cond ((procedure? time-proc) time-proc) - ((string? time-proc) (parse-vixie-time time-proc)) - ((list? time-proc) (lambda (current-time) - (primitive-eval time-proc))) - (else - (throw 'mcron-error 3 - "job: invalid first argument (next-time-function; " - "should be function, string or list)")))) - (displayable - (cond ((not (null? displayable)) (car displayable)) - ((procedure? action) "Lambda function") - ((string? action) action) - ((list? action) (with-output-to-string - (lambda () (display action))))))) - (add-job (lambda (current-time) - (set! current-action-time current-time) ;; ?? !!!! Code - - ;; Contributed by Sergey Poznyakoff to allow for daylight savings - ;; time changes. - (let* ((next (time-proc current-time)) - (gmtoff (tm:gmtoff (localtime next))) - (d (+ next (- gmtoff - (tm:gmtoff (localtime current-time)))))) - (if (eqv? (tm:gmtoff (localtime d)) gmtoff) - d - next))) - action - displayable - configuration-time - configuration-user))) diff --git a/scm/mcron/main.scm b/scm/mcron/main.scm deleted file mode 100644 index 1f2b068..0000000 --- a/scm/mcron/main.scm +++ /dev/null @@ -1,401 +0,0 @@ -;; Copyright (C) 2015, 2016 Mathieu Lirzin -;; Copyright (C) 2003, 2012 Dale Mellor -;; -;; This file is part of GNU mcron. -;; -;; GNU mcron is free software: you can redistribute it and/or modify it under -;; the terms of the GNU General Public License as published by the Free -;; Software Foundation, either version 3 of the License, or (at your option) -;; any later version. -;; -;; GNU mcron is distributed in the hope that it will be useful, but WITHOUT -;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -;; FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -;; more details. -;; -;; You should have received a copy of the GNU General Public License along -;; with GNU mcron. If not, see . - -;;; This is the 'main' routine for the whole system; this module is the global -;;; entry point (after the minimal C wrapper); to all intents and purposes the -;;; program is pure Guile and starts here. - -(define-module (mcron main) - #:use-module (ice-9 getopt-long) - #:use-module (ice-9 rdelim) - #:use-module (ice-9 regex) - #:use-module (mcron config) - #:use-module (mcron core) - #:use-module (mcron job-specifier) - #:use-module (mcron vixie-specification) - #:use-module (srfi srfi-2) - #:use-module (srfi srfi-26) - #:export (delete-run-file - main)) - -(define* (command-name #:optional (command (car (command-line)))) - "Extract the actual command name from COMMAND. This returns the last part -of COMMAND without any non-alphabetic characters. For example \"in.cron\" and -\"./mcron\" will return respectively \"cron\" and \"mcron\". - -When COMMAND is not specified this uses the first element of (command-line)." - (match:substring (regexp-exec (make-regexp "[[:alpha:]]*$") command))) - -(define (mcron-error exit-code . rest) - "Print an error message (made up from the parts of REST), and if the -EXIT-CODE error is fatal (present and non-zero) then exit to the system with -EXIT-CODE." - (with-output-to-port (current-error-port) - (lambda () - (for-each display (append (list (command-name) ": ") rest)) - (newline))) - (when (and exit-code (not (eq? exit-code 0))) - (primitive-exit exit-code))) - -(define-syntax-rule (catch-mcron-error exp ...) - "Evaluate EXP .... if an 'mcron-error exception occurs, print its diagnostics -and exit with its error code." - (catch 'mcron-error - (lambda () exp ...) - (lambda (key exit-code . msg) - (apply mcron-error exit-code msg)))) - -(define command-type - ;; We will be doing a lot of testing of the command name, so it makes sense - ;; to perform the string comparisons once and for all here. - (let* ((command (command-name)) - (command=? (cut string=? command <>))) - (cond ((command=? "mcron") 'mcron) - ((or (command=? "cron") (command=? "crond")) 'cron) - ((command=? "crontab") 'crontab) - (else (mcron-error 12 "The command name is invalid."))))) - -(define options - ;; There are a different set of options for the crontab personality compared - ;; to all the others, with the --help and --version options common to all - ;; the personalities. - (catch - 'misc-error - (lambda () - (getopt-long (command-line) - (append - (case command-type - ((crontab) - '((user (single-char #\u) (value #t)) - (edit (single-char #\e) (value #f)) - (list (single-char #\l) (value #f)) - (remove (single-char #\r) (value #f)))) - (else `((schedule (single-char #\s) (value #t) - (predicate - ,(lambda (value) - (string->number value)))) - (daemon (single-char #\d) (value #f)) - (noetc (single-char #\n) (value #f)) - (stdin (single-char #\i) (value #t) - (predicate - ,(lambda (value) - (or (string=? "vixie" value) - (string=? "guile" value)))))))) - '((version (single-char #\v) (value #f)) - (help (single-char #\h) (value #f)))))) - (lambda (key func fmt args . rest) - (mcron-error 1 (apply format (append (list #f fmt) args)))))) - -(define* (show-version #:optional (command (command-name))) - "Display version information for COMMAND and quit." - (let* ((name config-package-name) - (short-name (cadr (string-split name #\space))) - (version config-package-version)) - (simple-format #t "~a (~a) ~a -Copyright (C) 2015 the ~a authors. -License GPLv3+: GNU GPL version 3 or later -This is free software: you are free to change and redistribute it. -There is NO WARRANTY, to the extent permitted by law.\n" - command name version short-name) - (quit))) - -(define (show-package-information) - "Display where to get help and send bug reports." - (simple-format #t "\nReport bugs to: ~a. -~a home page: <~a> -General help using GNU software: \n" - config-package-bugreport - config-package-name - config-package-url)) - -(define* (show-help #:optional (command (command-name))) - "Display informations of usage for COMMAND and quit." - (simple-format #t "Usage: ~a" command) - (display - (case command-type - ((mcron) - " [OPTIONS] [FILES] -Run an mcron process according to the specifications in the FILES (`-' for -standard input), or use all the files in ~/.config/cron (or the -deprecated ~/.cron) with .guile or .vixie extensions. - - -v, --version Display version - -h, --help Display this help message - -sN, --schedule[=]N Display the next N jobs that will be run by mcron - -d, --daemon Immediately detach the program from the terminal - and run as a daemon process - -i, --stdin=(guile|vixie) Format of data passed as standard input or - file arguments (default guile)") - ((cron) - " [OPTIONS] -Unless an option is specified, run a cron daemon as a detached process, -reading all the information in the users' crontabs and in /etc/crontab. - - -v, --version Display version - -h, --help Display this help message - -sN, --schedule[=]N Display the next N jobs that will be run by cron - -n, --noetc Do not check /etc/crontab for updates (HIGHLY - RECOMMENDED).") - ((crontab) - " [-u user] file - crontab [-u user] { -e | -l | -r } - (default operation is replace, per 1003.2) - -e (edit user's crontab) - -l (list user's crontab) - -r (delete user's crontab") - (else "\nrubbish"))) - (newline) - (show-package-information) - (quit)) - -(define (delete-run-file) - "Remove the /var/run/cron.pid file so that crontab and other invocations of -cron don't get the wrong idea that a daemon is currently running. This -procedure is called from the C front-end whenever a terminal signal is -received." - (catch #t (lambda () (delete-file config-pid-file) - (delete-file config-socket-file)) - noop) - (quit)) - -(define (stdin->string) - "Return standard input as a string." - (with-output-to-string (lambda () (do ((in (read-char) (read-char))) - ((eof-object? in)) - (display in))))) - -(define (for-each-file proc directory) - "Apply PROC to each file in DIRECTORY. DIRECTORY must be a valid directory name. -PROC must be a procedure that take one file name argument. The return value -is not specified" - (let ((dir (opendir directory))) - (do ((file-name (readdir dir) (readdir dir))) - ((eof-object? file-name) (closedir dir)) - (proc file-name)))) - -(define process-user-file - (let ((guile-regexp (make-regexp "\\.gui(le)?$")) - (vixie-regexp (make-regexp "\\.vix(ie)?$"))) - (lambda* (file-name #:optional guile-syntax?) - "Process FILE-NAME according its extension. When GUILE-SYNTAX? is TRUE, -force guile syntax usage. If FILE-NAME format is not recognized, it is -silently ignored." - (cond ((string=? "-" file-name) - (if (string=? (option-ref options 'stdin "guile") "vixie") - (read-vixie-port (current-input-port)) - (eval-string (stdin->string)))) - ((or guile-syntax? (regexp-exec guile-regexp file-name)) - (load file-name)) - ((regexp-exec vixie-regexp file-name) - (read-vixie-file file-name)))))) - -(define (process-files-in-user-directory) - "Process files in $XDG_CONFIG_HOME/cron and/or ~/.cron directories (if -$XDG_CONFIG_HOME is not defined uses ~/.config/cron instead)." - (let ((errors 0) - (home-directory (passwd:dir (getpw (getuid))))) - (map (lambda (dir) - (catch #t - (lambda () - (for-each-file - (lambda (file) - (process-user-file (string-append dir "/" file))) - dir)) - (lambda (key . args) - (set! errors (1+ errors))))) - (list (string-append home-directory "/.cron") - (string-append (or (getenv "XDG_CONFIG_HOME") - (string-append home-directory "/.config")) - "/cron"))) - (when (eq? 2 errors) - (mcron-error 13 - "Cannot read files in your ~/.config/cron (or ~/.cron) directory.")))) - -(define (process-files-in-system-directory) - "Process all the files in the crontab directory. When the job procedure is -run on behalf of the configuration files, the jobs are registered on the -system with the appropriate user. Only root should be able to perform this -operation. The permissions on the /var/cron/tabs directory enforce this." - - (define (user-entry name) - ;; Return the user database entry if NAME is valid, otherwise #f. - (false-if-exception (getpwnam name))) - - (catch #t - (lambda () - (for-each-file - (lambda (user) - (and-let* ((entry (user-entry user))) ;crontab without user? - (set-configuration-user entry) - (catch-mcron-error - (read-vixie-file (string-append config-spool-dir "/" user))))) - config-spool-dir)) - (lambda (key . args) - (mcron-error 4 - "You do not have permission to access the system crontabs.")))) - -(define (cron-file-descriptors) - "Establish a socket to listen for updates from a crontab program, and return -a list containing the file descriptors correponding to the files read by -crontab. This requires that command-type is 'cron." - (if (eq? command-type 'cron) - (catch #t - (lambda () - (let ((sock (socket AF_UNIX SOCK_STREAM 0))) - (bind sock AF_UNIX config-socket-file) - (listen sock 5) - (list sock))) - (lambda (key . args) - (delete-file config-pid-file) - (mcron-error 1 "Cannot bind to UNIX socket " config-socket-file))) - '())) - -(define (process-update-request fdes-list) - "Read a user name from the socket, dealing with the /etc/crontab special -case, remove all the user's jobs from the job list, and then re-read the -user's updated file. In the special case drop all the system jobs and re-read -the /etc/crontab file. This function should be called whenever a message -comes in on the above socket." - (let* ((sock (car (accept (car fdes-list)))) - (user-name (read-line sock))) - (close sock) - (set-configuration-time (current-time)) - (catch-mcron-error - (if (string=? user-name "/etc/crontab") - (begin - (clear-system-jobs) - (use-system-job-list) - (read-vixie-file "/etc/crontab" parse-system-vixie-line) - (use-user-job-list)) - (let ((user (getpw user-name))) - (remove-user-jobs user) - (set-configuration-user user) - (read-vixie-file (string-append config-spool-dir "/" user-name))))))) - - -;;; -;;; Entry point. -;;; - -(define (main . args) - ;; Turn debugging on if indicated. - (when config-debug - (debug-enable 'backtrace)) - (when (option-ref options 'version #f) - (show-version)) - (when (option-ref options 'help #f) - (show-help)) - - ;; Setup the cron process, if appropriate. If there is already a - ;; /var/run/cron.pid file, then we must assume a cron daemon is already - ;; running and refuse to start another one. - ;; - ;; Otherwise, clear the MAILTO environment variable so that output from cron - ;; jobs is sent to the various users (this may still be overridden in the - ;; configuration files), and call the function in the C wrapper to set up - ;; terminal signal responses to vector to the procedure above. The PID file - ;; will be filled in properly later when we have forked our daemon process - ;; (but not done if we are only viewing the schedules). - (when (eq? command-type 'cron) - (unless (eqv? (getuid) 0) - (mcron-error 16 - "This program must be run by the root user (and should have been " - "installed as such).")) - (when (access? config-pid-file F_OK) - (mcron-error 1 - "A cron daemon is already running.\n (If you are sure this is not" - " true, remove the file\n " config-pid-file ".)")) - (unless (option-ref options 'schedule #f) - (with-output-to-file config-pid-file noop)) - (setenv "MAILTO" #f) - ;; XXX: At compile time, this yields a "possibly unbound variable" - ;; warning, but this is OK since it is bound in the C wrapper. - (c-set-cron-signals)) - - ;; Now we have the procedures in place for dealing with the contents of - ;; configuration files, the crontab personality is able to validate such - ;; files. If the user requested the crontab personality, we load and run the - ;; code here and then get out. - (when (eq? command-type 'crontab) - (load "crontab.scm") - (quit)) - - ;; Having defined all the necessary procedures for scanning various sets of - ;; files, we perform the actual configuration of the program depending on - ;; the personality we are running as. If it is mcron, we either scan the - ;; files passed on the command line, or else all the ones in the user's - ;; .config/cron (or .cron) directory. If we are running under the cron - ;; personality, we read the /var/cron/tabs directory and also the - ;; /etc/crontab file. - (case command-type - ((mcron) - (if (null? (option-ref options '() '())) - (process-files-in-user-directory) - (for-each (lambda (file-path) (process-user-file file-path #t)) - (option-ref options '() '())))) - ((cron) - (process-files-in-system-directory) - (use-system-job-list) - (catch-mcron-error (read-vixie-file "/etc/crontab" - parse-system-vixie-line)) - (use-user-job-list) - (unless (option-ref options 'noetc #f) - (display "\ -WARNING: cron will check for updates to /etc/crontab EVERY MINUTE. If you do -not use this file, or you are prepared to manually restart cron whenever you -make a change, then it is HIGHLY RECOMMENDED that you use the --noetc -option.\n") - (set-configuration-user "root") - (job '(- (next-minute-from (next-minute)) 6) - check-system-crontab - "/etc/crontab update checker.")))) - - ;; If the user has requested a schedule of jobs that will run, we provide - ;; the information here and then get out. Start by determining the number - ;; of time points in the future that output is required for. This may be - ;; provided on the command line as a parameter to the --schedule option, or - ;; else we assume a default of 8. Finally, ensure that the count is some - ;; positive integer. - (and-let* ((count (option-ref options 'schedule #f))) - (set! count (string->number count)) - (display (get-schedule (if (<= count 0) 1 count))) - (quit)) - - ;; If we are supposed to run as a daemon process (either a --daemon option - ;; has been explicitly used, or we are running as cron or crond), detach - ;; from the terminal now. If we are running as cron, we can now write the - ;; PID file. - (when (option-ref options 'daemon (eq? command-type 'cron)) - (unless (eqv? (primitive-fork) 0) - (quit)) - (setsid) - (when (eq? command-type 'cron) - (with-output-to-file config-pid-file - (lambda () (display (getpid)) (newline))))) - - ;; Now the main loop. Forever execute the run-job-loop procedure in the - ;; mcron core, and when it drops out (can only be because a message has come - ;; in on the socket) we process the socket request before restarting the - ;; loop again. Sergey Poznyakoff: we can also drop out of run-job-loop - ;; because of a SIGCHLD, so must test FDES-LIST. - (catch-mcron-error - (let ((fdes-list (cron-file-descriptors))) - (while #t - (run-job-loop fdes-list) - (unless (null? fdes-list) - (process-update-request fdes-list)))))) diff --git a/scm/mcron/mcron-core.scm b/scm/mcron/mcron-core.scm deleted file mode 100644 index 13781c9..0000000 --- a/scm/mcron/mcron-core.scm +++ /dev/null @@ -1,270 +0,0 @@ -;; Copyright (C) 2015, 2016 Mathieu Lirzin -;; Copyright (C) 2003 Dale Mellor -;; -;; This file is part of GNU mcron. -;; -;; GNU mcron is free software: you can redistribute it and/or modify it under -;; the terms of the GNU General Public License as published by the Free -;; Software Foundation, either version 3 of the License, or (at your option) -;; any later version. -;; -;; GNU mcron is distributed in the hope that it will be useful, but WITHOUT -;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -;; FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -;; more details. -;; -;; You should have received a copy of the GNU General Public License along -;; with GNU mcron. If not, see . - - - -(define-module (mcron core) - #:use-module (mcron environment) - #:use-module (srfi srfi-9) - #:export (add-job - remove-user-jobs - get-schedule - run-job-loop - ;; These three are deprecated and not documented. - use-system-job-list - use-user-job-list - clear-system-jobs) - #:re-export (clear-environment-mods - append-environment-mods)) - - -(use-modules (srfi srfi-1) ;; For remove. - (srfi srfi-2)) ;; For and-let*. - - - -;; The list of all jobs known to the system. Each element of the list is -;; -;; (make-job user next-time-function action environment displayable next-time) -;; -;; where action must be a procedure, and the environment is an alist of -;; modifications that need making to the UNIX environment before the action is -;; run. The next-time element is the only one that is modified during the -;; running of a cron process (i.e. all the others are set once and for all at -;; configuration time). -;; -;; The reason we maintain two lists is that jobs in /etc/crontab may be placed -;; in one, and all other jobs go in the other. This makes it possible to remove -;; all the jobs in the first list in one go, and separately we can remove all -;; jobs from the second list which belong to a particular user. This behaviour -;; is required for full vixie compatibility. - -(define system-job-list '()) -(define user-job-list '()) - -(define configuration-source 'user) - -(define (use-system-job-list) (set! configuration-source 'system)) -(define (use-user-job-list) (set! configuration-source 'user)) - -;; A cron job. -(define-record-type - (make-job user time-proc action environment displayable next-time) - job? - (user job:user) ;object : passwd entry - (time-proc job:next-time-function) ;proc : with one 'time' parameter - (action job:action) ;thunk : user's code - (environment job:environment) ;alist : environment variables - (displayable job:displayable) ;string : visible in schedule - (next-time job:next-time ;number : time in UNIX format - job:next-time-set!)) - -;; Remove jobs from the user-job-list belonging to this user. - -(define (remove-user-jobs user) - (if (or (string? user) - (integer? user)) - (set! user (getpw user))) - (set! user-job-list - (remove (lambda (job) (eqv? (passwd:uid user) - (passwd:uid (job:user job)))) - user-job-list))) - - - -;; Remove all the jobs on the system job list. - -(define (clear-system-jobs) (set! system-job-list '())) - - - -;; Add a new job with the given specifications to the head of the appropriate -;; jobs list. - -(define (add-job time-proc action displayable configuration-time - configuration-user) - (let ((entry (make-job configuration-user - time-proc - action - (get-current-environment-mods-copy) - displayable - (time-proc configuration-time)))) - (if (eq? configuration-source 'user) - (set! user-job-list (cons entry user-job-list)) - (set! system-job-list (cons entry system-job-list))))) - - - -;; Procedure to locate the jobs in the global job-list with the lowest -;; (soonest) next-times. These are the jobs for which we must schedule the mcron -;; program (under any personality) to next wake up. The return value is a cons -;; cell consisting of the next time (maintained in the next-time variable) and a -;; list of the job entries that are to run at this time (maintained in the -;; next-jobs-list variable). -;; -;; The procedure works by first obtaining the time of the first job on the list, -;; and setting this job in the next-jobs-list. Then for each other entry on the -;; job-list, either the job runs earlier than any other that have been scanned, -;; in which case the next-time and next-jobs-list are re-initialized to -;; accomodate, or the job runs at the same time as the next job, in which case -;; the next-jobs-list is simply augmented with the new job, or else the job runs -;; later than others noted in which case we ignore it for now and continue to -;; recurse the list. - -(define (find-next-jobs) - (let ((job-list (append system-job-list user-job-list))) - - (if (null? job-list) - - '(#f . '()) - - (let ((next-time 2000000000) - (next-jobs-list '())) - - (for-each - (lambda (job) - (let ((this-time (job:next-time job))) - (cond ((< this-time next-time) - (set! next-time this-time) - (set! next-jobs-list (list job))) - ((eqv? this-time next-time) - (set! next-jobs-list (cons job next-jobs-list)))))) - job-list) - - (cons next-time next-jobs-list))))) - - - -;; Create a string containing a textual list of the next count jobs to run. -;; -;; Enter a loop of displaying the next set of jobs to run, artificially -;; forwarding the time to the next time point (instead of waiting for it to -;; occur as we would do in a normal run of mcron), and recurse around the loop -;; count times. -;; -;; Note that this has the effect of mutating the job timings. Thus the program -;; must exit after calling this function; the internal data state will be left -;; unusable. - -(define (get-schedule count) - (with-output-to-string - (lambda () - (do ((count count (- count 1))) - ((eqv? count 0)) - (and-let* - ((next-jobs (find-next-jobs)) - (time (car next-jobs)) - (date-string (strftime "%c %z\n" (localtime time)))) - (for-each (lambda (job) - (display date-string) - (display (job:displayable job)) - (newline)(newline) - (job:next-time-set! job ((job:next-time-function job) - (job:next-time job)))) - (cdr next-jobs))))))) - - - -;; For proper housekeeping, it is necessary to keep a record of the number of -;; child processes we fork off to run the jobs. - -(define number-children 0) - - - -;; For every job on the list, fork a process to run it (noting the fact by -;; increasing the number-children counter), and in the new process set up the -;; run-time environment exactly as it should be before running the job proper. -;; -;; In the parent, update the job entry by computing the next time the job needs -;; to run. - -(define (run-jobs jobs-list) - (for-each - (lambda (job) - (if (eqv? (primitive-fork) 0) - (begin - (setgid (passwd:gid (job:user job))) - (setuid (passwd:uid (job:user job))) - (chdir (passwd:dir (job:user job))) - (modify-environment (job:environment job) (job:user job)) - ((job:action job)) - (primitive-exit 0)) - (begin - (set! number-children (+ number-children 1)) - (job:next-time-set! job ((job:next-time-function job) - (current-time)))))) - jobs-list)) - - - -;; Give any zombie children a chance to die, and decrease the number known to -;; exist. - -(define (child-cleanup) - (do () ((or (<= number-children 0) - (eqv? (car (waitpid WAIT_ANY WNOHANG)) 0))) - (set! number-children (- number-children 1)))) - - - -;; Now the main loop. Loop over all job specifications, get a list of the next -;; ones to run (may be more than one). Set an alarm and go to sleep. When we -;; wake, run the jobs and reap any children (old jobs) that have -;; completed. Repeat ad infinitum. -;; -;; Note that, if we wake ahead of time, it can only mean that a signal has been -;; sent by a crontab job to tell us to re-read a crontab file. In this case we -;; break out of the loop here, and let the main procedure deal with the -;; situation (it will eventually re-call this function, thus maintaining the -;; loop). - -(define (run-job-loop . fd-list) - - (call-with-current-continuation - (lambda (break) - - (let ((fd-list (if (null? fd-list) '() (car fd-list)))) - - (let loop () - - (let* ((next-jobs (find-next-jobs)) - (next-time (car next-jobs)) - (next-jobs-list (cdr next-jobs)) - (sleep-time (if next-time (- next-time (current-time)) - 2000000000))) - - (and (> sleep-time 0) - (if (not (null? - (catch 'system-error - (lambda () - (car (select fd-list '() '() sleep-time))) - (lambda (key . args) ;; Exception add by Sergey - ;; Poznyakoff. - (if (member (car (last args)) - (list EINTR EAGAIN)) - (begin - (child-cleanup) '()) - (apply throw key args)))))) - (break))) - - (run-jobs next-jobs-list) - - (child-cleanup) - - (loop))))))) diff --git a/scm/mcron/redirect.scm b/scm/mcron/redirect.scm deleted file mode 100644 index af763cb..0000000 --- a/scm/mcron/redirect.scm +++ /dev/null @@ -1,190 +0,0 @@ -;; Copyright (C) 2003 Dale Mellor -;; -;; This file is part of GNU mcron. -;; -;; GNU mcron is free software: you can redistribute it and/or modify it under -;; the terms of the GNU General Public License as published by the Free -;; Software Foundation, either version 3 of the License, or (at your option) -;; any later version. -;; -;; GNU mcron is distributed in the hope that it will be useful, but WITHOUT -;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -;; FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -;; more details. -;; -;; You should have received a copy of the GNU General Public License along -;; with GNU mcron. If not, see . - - - -;; This module provides the (with-mail-out action . user) procedure. This -;; procedure runs the action in a child process, allowing the user control over -;; the input and output (including standard error). The input is governed (only -;; in the case of a string action) by the placing of percentage signs in the -;; string; the first delimits the true action from the standard input, and -;; subsequent ones denote newlines to be placed into the input. The output (if -;; there actually is any) is controlled by the MAILTO environment variable. If -;; this is not defined, output is e-mailed to the user passed as argument, if -;; any, or else the owner of the action; if defined but empty then any output is -;; sunk to /dev/null; otherwise output is e-mailed to the address held in the -;; MAILTO variable. - -(define-module (mcron redirect) - #:export (with-mail-out) - #:use-module (ice-9 regex) - #:use-module ((mcron config) :select (config-sendmail)) - #:use-module (mcron vixie-time)) - - - -;; An action string consists of a sequence of characters forming a command -;; executable by the shell, possibly followed by an non-escaped percentage -;; sign. The text after the percentage sign is to be fed to the command's -;; standard input, with further unescaped percents being substituted with -;; newlines. The escape character can itself be escaped. -;; -;; This regexp separates the two halves of the string, and indeed determines if -;; the second part is present. - -(define action-string-regexp (make-regexp "((\\\\%|[^%])*)%(.*)$")) - - - -;; This regexp identifies an escaped percentage sign. - -(define e-percent (make-regexp "\\\\%")) - - -;; Function to execute some action (this may be a shell command, lamdba function -;; or list of scheme procedures) in a forked process, with the input coming from -;; the string, and output (including the error output) being sent to a pipe -;; opened on a mail transport. - -(use-modules (ice-9 popen)) - -(define (with-mail-out action . user) - - ;; Determine the name of the user who is to recieve the mail, looking for a - ;; name in the optional user argument, then in the MAILTO environment - ;; variable, and finally in the LOGNAME environment variable. (The case - ;; MAILTO="" is dealt with specially below.) - - (let* ((mailto (getenv "MAILTO")) - (user (cond (mailto mailto) - ((not (null? user)) (car user)) - (else (getenv "LOGNAME")))) - (parent->child (pipe)) - (child->parent (pipe)) - (child-pid (primitive-fork))) - - - ;; The child process. Close redundant ends of pipes, remap the standard - ;; streams, and run the action, taking care to chop off the input part of an - ;; action string. - - (if (eqv? child-pid 0) - (begin - (close (cdr parent->child)) - (close (car child->parent)) - - (dup2 (port->fdes (car parent->child)) 0) - (close (car parent->child)) - (dup2 (port->fdes (cdr child->parent)) 1) - (close (cdr child->parent)) - (dup2 1 2) - - (cond ((string? action) - (let ((match (regexp-exec action-string-regexp action))) - (system (if match - (let ((action (match:substring match 1))) - (do ((match (regexp-exec e-percent action) - (regexp-exec e-percent action))) - ((not match)) - (set! action (string-append - (match:prefix match) - "%" - (match:suffix match)))) - action) - action)))) - - ((procedure? action) (action)) - ((list? action) (primitive-eval action))) - - (primitive-exit 0))) - - - ;; The parent process. Get rid of redundant pipe ends. - - (close (car parent->child)) - (close (cdr child->parent)) - - - ;; Put stuff to child from after '%' in command line, replacing - ;; other %'s with newlines. Ugly or what? - - (if (string? action) - (let ((port (cdr parent->child)) - (match (regexp-exec action-string-regexp action))) - (if (and match - (match:substring match 3)) - (with-input-from-string (match:substring match 3) - (lambda () - (let loop () - (let ((next-char (read-char))) - (if (not (eof-object? next-char)) - (cond - ((char=? next-char #\%) - (newline port) - (loop)) - ((char=? next-char #\\) - (let ((escape (read-char))) - (if (eof-object? escape) - (display #\\ port) - (if (char=? escape #\%) - (begin - (display #\% port) - (loop)) - (begin - (display #\\ port) - (display escape port) - (loop)))))) - (else - (display next-char port) - (loop))))))))))) - - - ;; So the child process doesn't hang on to its input expecting more stuff. - - (close (cdr parent->child)) - - - ;; That's got streaming into the child's input out of the way, now we stream - ;; the child's output to a mail sink, but only if there is something there - ;; in the first place. - - (if (eof-object? (peek-char (car child->parent))) - - (read-char (car child->parent)) - - (begin - (set-current-output-port (if (and (string? mailto) - (string=? mailto "")) - (open-output-file "/dev/null") - (open-output-pipe - (string-append config-sendmail - " " - user)))) - (set-current-input-port (car child->parent)) - (display "To: ") (display user) (newline) - (display "From: mcron") (newline) - (display (string-append "Subject: " user "@" (gethostname))) - (newline) - (newline) - - (do ((next-char (read-char) (read-char))) - ((eof-object? next-char)) - (display next-char)))) - - (close (car child->parent)) - - (waitpid child-pid))) diff --git a/scm/mcron/vixie-specification.scm b/scm/mcron/vixie-specification.scm deleted file mode 100644 index 5cd1528..0000000 --- a/scm/mcron/vixie-specification.scm +++ /dev/null @@ -1,207 +0,0 @@ -;; Copyright (C) 2003 Dale Mellor -;; -;; This file is part of GNU mcron. -;; -;; GNU mcron is free software: you can redistribute it and/or modify it under -;; the terms of the GNU General Public License as published by the Free -;; Software Foundation, either version 3 of the License, or (at your option) -;; any later version. -;; -;; GNU mcron is distributed in the hope that it will be useful, but WITHOUT -;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -;; FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -;; more details. -;; -;; You should have received a copy of the GNU General Public License along -;; with GNU mcron. If not, see . - - - -;; This file provides methods for reading a complete Vixie-style configuration -;; file, either from a real file or an already opened port. It also exposes the -;; method for parsing the time-specification part of a Vixie string, so that -;; these can be used to form the next-time-function of a job in a Guile -;; configuration file. - -(define-module (mcron vixie-specification) - #:export (parse-user-vixie-line - parse-system-vixie-line - read-vixie-port - read-vixie-file - check-system-crontab) - #:use-module ((mcron config) :select (config-socket-file)) - #:use-module (mcron core) - #:use-module (mcron job-specifier) - #:use-module (mcron redirect) - #:use-module (mcron vixie-time)) - - -(use-modules (ice-9 regex) (ice-9 rdelim) - (srfi srfi-1) (srfi srfi-2) (srfi srfi-13) (srfi srfi-14)) - - - -;; A line in a Vixie-style crontab file which gives a command specification -;; carries two pieces of information: a time specification consisting of five -;; space-separated items, and a command which is also separated from the time -;; specification by a space. The line is broken into the two components, and the -;; job procedure run to add the two pieces of information to the job list (this -;; will in turn use the above function to turn the time specification into a -;; function for computing future run times of the command). - -(define parse-user-vixie-line-regexp - (make-regexp "^[[:space:]]*(([^[:space:]]+[[:space:]]+){5})(.*)$")) - -(define (parse-user-vixie-line line) - (let ((match (regexp-exec parse-user-vixie-line-regexp line))) - (if (not match) - (throw 'mcron-error 10 "Bad job line in Vixie file.")) - (job (match:substring match 1) - (lambda () (with-mail-out (match:substring match 3))) - (match:substring match 3)))) - - - -;; The case of reading a line from /etc/crontab is similar to above but the user -;; ID appears in the sixth field, before the action. - -(define parse-system-vixie-line-regexp - (make-regexp (string-append "^[[:space:]]*(([^[:space:]]+[[:space:]]+){5})" - "([[:alpha:]][[:alnum:]_]*)[[:space:]]+(.*)$"))) - -(define (parse-system-vixie-line line) - (let ((match (regexp-exec parse-system-vixie-line-regexp line))) - (if (not match) - (throw 'mcron-error 11 "Bad job line in /etc/crontab.")) - (let ((user (match:substring match 3))) - (set-configuration-user user) - (job (match:substring match 1) - (lambda () (with-mail-out (match:substring match 4) - user)) - (match:substring match 4))))) - - - -;; Procedure to act on an environment variable specification in a Vixie-style -;; configuration file, by adding an entry to the alist above. Returns #t if the -;; operation was successful, #f if the line could not be interpreted as an -;; environment specification. - -(define parse-vixie-environment-regexp1 - (make-regexp - "^[ \t]*([[:alpha:]_][[:alnum:]_]*)[ \t]*=[ \t]*\"(.*)\"[ \t]*$")) -(define parse-vixie-environment-regexp2 - (make-regexp - "^[ \t]*([[:alpha:]_][[:alnum:]_]*)[ \t]*=[ \t]*'(.*)'[ \t]*$")) -(define parse-vixie-environment-regexp3 - (make-regexp - "^[ \t]*([[:alpha:]_][[:alnum:]_]*)[ \t]*=[ \t]*(.*[^ \t])[ \t]*$")) -(define parse-vixie-environment-regexp4 - (make-regexp - "^[ \t]*([[:alpha:]_][[:alnum:]_]*)[ \t]*=[ \t]*$")) - - -(define (parse-vixie-environment string) - (let ((match (or (regexp-exec parse-vixie-environment-regexp1 string) - (regexp-exec parse-vixie-environment-regexp2 string) - (regexp-exec parse-vixie-environment-regexp3 string)))) - (if match - (append-environment-mods (match:substring match 1) - (match:substring match 2)) - (and-let* ((match (regexp-exec parse-vixie-environment-regexp4 string))) - (append-environment-mods (match:substring match 1) #f))))) - - - - -;; The next procedure reads an entire Vixie-style file. For each line in the -;; file there are three possibilities (after continuation lines have been -;; appended): the line is blank or contains only a comment, the line contains an -;; environment modifier which will be handled in the mcron environment module, -;; or the line contains a command specification in which case we use the -;; procedure above to add an entry to the internal job list. -;; -;; Note that the environment modifications are cleared, so that there is no -;; interference between crontab files (this might lead to unpredictable -;; behaviour because the order in which crontab files are processed, if there is -;; more than one, is generally undefined). - -(define read-vixie-file-comment-regexp - (make-regexp "^[[:space:]]*(#.*)?$")) - - -(define (read-vixie-port port . parse-vixie-line) - (clear-environment-mods) - (if port - (let ((parse-vixie-line - (if (null? parse-vixie-line) parse-user-vixie-line - (car parse-vixie-line)))) - (do ((line (read-line port) (read-line port)) - (line-number 1 (1+ line-number))) - ((eof-object? line)) - - (let ((report-line line-number)) - ;; If the line ends with \, append the next line. - (while (and (>= (string-length line) 1) - (char=? (string-ref line - (- (string-length line) 1)) - #\\)) - (let ((next-line (read-line port))) - (if (eof-object? next-line) - (set! next-line "")) - (set! line-number (1+ line-number)) - (set! line - (string-append - (substring line 0 (- (string-length line) 1)) - next-line)))) - - (catch 'mcron-error - (lambda () - ;; Consider the three cases mentioned in the description. - (or (regexp-exec read-vixie-file-comment-regexp line) - (parse-vixie-environment line) - (parse-vixie-line line))) - (lambda (key exit-code . msg) - (throw 'mcron-error exit-code - (apply string-append - (number->string report-line) - ": " - msg))))))))) - - - -;; If a file cannot be opened, we must silently ignore it because it may have -;; been removed by crontab. However, if the file is there it must be parseable, -;; otherwise the error must be propagated to the caller. - -(define (read-vixie-file file-path . parse-vixie-line) - (let ((port #f)) - (catch #t (lambda () (set! port (open-input-file file-path))) - (lambda (key . args) (set! port #f))) - (if port - (catch 'mcron-error - (lambda () - (if (null? parse-vixie-line) - (read-vixie-port port) - (read-vixie-port port (car parse-vixie-line))) - (close port)) - (lambda (key exit-code . msg) - (close port) - (throw 'mcron-error exit-code - (apply string-append file-path ":" msg))))))) - - -;; A procedure which determines if the /etc/crontab file has been recently -;; modified, and, if so, signals the main routine to re-read the file. We run -;; under the with-mail-to command so that the process runs as a child, -;; preventing lockup. If cron is supposed to check for updates to /etc/crontab, -;; then this procedure will be called about 5 seconds before every minute. - -(define (check-system-crontab) - (with-mail-out (lambda () - (let ((mtime (stat:mtime (stat "/etc/crontab")))) - (if (> mtime (- (current-time) 60)) - (let ((socket (socket AF_UNIX SOCK_STREAM 0))) - (connect socket AF_UNIX config-socket-file) - (display "/etc/crontab" socket) - (close socket))))))) diff --git a/scm/mcron/vixie-time.scm b/scm/mcron/vixie-time.scm deleted file mode 100644 index a91fa89..0000000 --- a/scm/mcron/vixie-time.scm +++ /dev/null @@ -1,384 +0,0 @@ -;; Copyright (C) 2003 Dale Mellor -;; -;; This file is part of GNU mcron. -;; -;; GNU mcron is free software: you can redistribute it and/or modify it under -;; the terms of the GNU General Public License as published by the Free -;; Software Foundation, either version 3 of the License, or (at your option) -;; any later version. -;; -;; GNU mcron is distributed in the hope that it will be useful, but WITHOUT -;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -;; FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -;; more details. -;; -;; You should have received a copy of the GNU General Public License along -;; with GNU mcron. If not, see . - -(define-module (mcron vixie-time) - #:use-module (ice-9 regex) - #:use-module (mcron job-specifier) - #:use-module (srfi srfi-1) - #:use-module (srfi srfi-13) - #:use-module (srfi srfi-14) - #:export (parse-vixie-time)) - -;; In Vixie-style time specifications three-letter symbols are allowed to stand -;; for the numbers corresponding to months and days of the week. We deal with -;; this by making a textual substitution early on in the processing of the -;; strings. -;; -;; We start by defining, once and for all, a list of cons cells consisting of -;; regexps which will match the symbols - which allow an arbitrary number of -;; other letters to appear after them (so that the user can optionally complete -;; the month and day names; this is an extension of Vixie) - and the value which -;; is to replace the symbol. -;; -;; The procedure then takes a string, and then for each symbol in the -;; parse-symbols list attempts to locate an instance and replace it with an -;; ASCII representation of the value it stands for. The procedure returns the -;; modified string. (Note that each symbol can appear only once, which meets the -;; Vixie specifications technically but still allows silly users to mess things -;; up). - -(define parse-symbols - (map (lambda (symbol-cell) - (cons (make-regexp (string-append (car symbol-cell) "[[:alpha:]]*") - regexp/icase) - (cdr symbol-cell))) - '(("jan" . "0") ("feb" . "1") ("mar" . "2") ("apr" . "3") - ("may" . "4") ("jun" . "5") ("jul" . "6") ("aug" . "7") - ("sep" . "8") ("oct" . "9") ("nov" . "10") ("dec" . "11") - - ("sun" . "0") ("mon" . "1") ("tue" . "2") ("wed" . "3") - ("thu" . "4") ("fri" . "5") ("sat" . "6") ))) - -(define (vixie-substitute-parse-symbols string) - (for-each (lambda (symbol-cell) - (let ((match (regexp-exec (car symbol-cell) string))) - (if match - (set! string (string-append (match:prefix match) - (cdr symbol-cell) - (match:suffix match)))))) - parse-symbols) - string) - - - -;; A Vixie time specification is made up of a space-separated list of elements, -;; and the elements consist of a comma-separated list of subelements. The -;; procedure below takes a string holding a subelement, which should have no -;; spaces or symbols (see above) in it, and returns a list of all values which -;; that subelement indicates. There are five distinct cases which must be dealt -;; with: [1] a single '*' which returns a list of all values; [2] a '*' followed -;; by a step specifier; [3] a range and step specifier; [4] a range; and [5] a -;; single number. -;; -;; To perform the computation required for the '*' cases, we need to pass the -;; limit of the allowable range for this subelement as the third argument. As -;; days of the month start at 1 while all the other time components start at 0, -;; we must pass the base of the range to deal with this case also. - -(define parse-vixie-subelement-regexp - (make-regexp "^([[:digit:]]+)(-([[:digit:]]+)(/([[:digit:]]+))?)?$")) - -(define (parse-vixie-subelement string base limit) - (if (char=? (string-ref string 0) #\*) - (range base limit (if (> (string-length string) 1) - (string->number (substring string 2)) ;; [2] - 1)) ;; [1] - (let ((match (regexp-exec parse-vixie-subelement-regexp string))) - (cond ((not match) - (throw 'mcron-error 9 - "Bad Vixie-style time specification.")) - ((match:substring match 5) - (range (string->number (match:substring match 1)) - (+ 1 (string->number (match:substring match 3))) - (string->number (match:substring match 5)))) ;; [3] - ((match:substring match 3) - (range (string->number (match:substring match 1)) - (+ 1 (string->number (match:substring match 3))))) ;; [4] - (else - (list (string->number (match:substring match 1)))))))) ;; [5] - - - -;; A Vixie element contains the entire specification, without spaces or symbols, -;; of the acceptable values for one of the time components (minutes, hours, -;; days, months, week days). Here we break the comma-separated list into -;; subelements, and process each with the procedure above. The return value is a -;; list of all the valid values of all the subcomponents. -;; -;; The second and third arguments are the base and upper limit on the values -;; that can be accepted for this time element. -;; -;; The effect of the 'apply append' is to merge a list of lists into a single -;; list. - -(define (parse-vixie-element string base limit) - (apply append - (map (lambda (sub-element) - (parse-vixie-subelement sub-element base limit)) - (string-tokenize string (char-set-complement (char-set #\,)))))) - - - -;; Consider there are two lists, one of days in the month, the other of days in -;; the week. This procedure returns an augmented list of days in the month with -;; weekdays accounted for. - -(define (interpolate-weekdays mday-list wday-list month year) - (let ((t (localtime 0))) - (set-tm:mday t 1) - (set-tm:mon t month) - (set-tm:year t year) - (let ((first-day (tm:wday (cdr (mktime t))))) - (apply append - mday-list - (map (lambda (wday) - (let ((first (- wday first-day))) - (if (< first 0) (set! first (+ first 7))) - (range (+ 1 first) 32 7))) - wday-list))))) - - - -;; Return the number of days in a month. Fix up a tm object for the zero'th day -;; of the next month, rationalize the object and extract the day. - -(define (days-in-month month year) - (let ((t (localtime 0))) (set-tm:mday t 0) - (set-tm:mon t (+ month 1)) - (set-tm:year t year) - (tm:mday (cdr (mktime t))))) - - - -;; We will be working with a list of time-spec's, one for each element of a time -;; specification (minute, hour, ...). Each time-spec holds three pieces of -;; information: a list of acceptable values for this time component, a procedure -;; to get the component from a tm object, and a procedure to set the component -;; in a tm object. - -(define (time-spec:list time-spec) (vector-ref time-spec 0)) -(define (time-spec:getter time-spec) (vector-ref time-spec 1)) -(define (time-spec:setter time-spec) (vector-ref time-spec 2)) - - - -;; This procedure modifies the time tm object by setting the component referred -;; to by the time-spec object to its next acceptable value. If this value is not -;; greater than the original (because we have wrapped around the top of the -;; acceptable values list), then the function returns #t, otherwise it returns -;; #f. Thus, if the return value is true then it will be necessary for the -;; caller to increment the next coarser time component as well. -;; -;; The first part of the let block is a concession to humanity; the procedure is -;; simply unreadable without all of these aliases. - -(define (increment-time-component time time-spec) - (let* ((time-list (time-spec:list time-spec)) - (getter (time-spec:getter time-spec)) - (setter (time-spec:setter time-spec)) - (find-best-next (@@ (mcron job-specifier) %find-best-next)) - (next-best (find-best-next (getter time) time-list)) - (wrap-around (eqv? (cdr next-best) 9999))) - (setter time ((if wrap-around car cdr) next-best)) - wrap-around)) - - - -;; There now follows a set of procedures for adjusting an element of time, -;; i.e. taking it to the next acceptable value. In each case, the head of the -;; time-spec-list is expected to correspond to the component of time in -;; question. If the adjusted value wraps around its allowed range, then the next -;; biggest element of time must be adjusted, and so on. - -;; There is no specification allowed for the year component of -;; time. Therefore, if we have to make an adjustment (presumably because a -;; monthly adjustment has wrapped around the top of its range) we can simply -;; go to the next year. - -(define (nudge-year! time) - (set-tm:year time (+ (tm:year time) 1))) - - -;; We nudge the month by finding the next allowable value, and if it wraps -;; around we also nudge the year. The time-spec-list will have time-spec -;; objects for month and weekday. - -(define (nudge-month! time time-spec-list) - (and (increment-time-component time (car time-spec-list)) - (nudge-year! time))) - - -;; Try to increment the day component of the time according to the combination -;; of the mday-list and the wday-list. If this wraps around the range, or if -;; this falls outside the current month (31st February, for example), then -;; bump the month, set the day to zero, and recurse on this procedure to find -;; the next day in the new month. -;; -;; The time-spec-list will have time-spec entries for mday, month, and -;; weekday. - -(define (nudge-day! time time-spec-list) - (if (or (increment-time-component - time - (vector - (interpolate-weekdays (time-spec:list (car time-spec-list)) - (time-spec:list (caddr time-spec-list)) - (tm:mon time) - (tm:year time)) - tm:mday - set-tm:mday)) - (> (tm:mday time) (days-in-month (tm:mon time) (tm:year time)))) - (begin - (nudge-month! time (cdr time-spec-list)) - (set-tm:mday time 0) - (nudge-day! time time-spec-list)))) - - - -;; The hour is bumped to the next accceptable value, and the day is bumped if -;; the hour wraps around. -;; -;; The time-spec-list holds specifications for hour, mday, month and weekday. - -(define (nudge-hour! time time-spec-list) - (and (increment-time-component time (car time-spec-list)) - (nudge-day! time (cdr time-spec-list)))) - - - -;; The minute is bumped to the next accceptable value, and the hour is bumped -;; if the minute wraps around. -;; -;; The time-spec-list holds specifications for minute, hour, day-date, month -;; and weekday. - -(define (nudge-min! time time-spec-list) - (and (increment-time-component time (car time-spec-list)) - (nudge-hour! time (cdr time-spec-list)))) - - - - -;; This is a procedure which returns a procedure which computes the next time a -;; command should run after the current time, based on the information in the -;; Vixie-style time specification. -;; -;; We start by computing a list of time-spec objects (described above) for the -;; minute, hour, date, month, year and weekday components of the overall time -;; specification [1]. Special care is taken to produce proper values for -;; fields 2 and 4: according to Vixie specification "If both fields are -;; restricted (ie, aren't *), the command will be run when _either_ field -;; matches the current time." This implies that if one of these fields is *, -;; while the other is not, its value should be '() [0], otherwise -;; interpolate-weekdays below will produce incorrect results. - -;; When we create the return procedure, it is this list to -;; which references to a time-spec-list will be bound. It will be used by the -;; returned procedure [3] to compute the next time a function should run. Any -;; 7's in the weekday component of the list (the last one) are folded into 0's -;; (both values represent sunday) [2]. Any 0's in the month-day component of the -;; list are removed (this allows a solitary zero to be used to indicate that -;; jobs should only run on certain days of the _week_) [2.1]. -;; -;; The returned procedure itself:- -;; -;; Starts by obtaining the current broken-down time [4], and fixing it to -;; ensure that it is an acceptable value, as follows. Each component from the -;; biggest down is checked for acceptability, and if it is not acceptable it -;; is bumped to the next acceptable value (this may cause higher components to -;; also be bumped if there is range wrap-around) and all the lower components -;; are set to -1 so that it can successfully be bumped up to zero if this is -;; an allowed value. The -1 value will be bumped up subsequently to an allowed -;; value [5]. -;; -;; Once it has been asserted that the current time is acceptable, or has been -;; adjusted to one minute before the next acceptable time, the minute -;; component is then bumped to the next acceptable time, which may ripple -;; through the higher components if necessary [6]. We now have the next time -;; the command needs to run. -;; -;; The new time is then converted back into a UNIX time and returned [7]. - -(define (parse-vixie-time string) - (let ((tokens (string-tokenize (vixie-substitute-parse-symbols string)))) - (cond - ((> (length tokens) 5) - (throw 'mcron-error 9 - "Too many fields in Vixie-style time specification")) - ((< (length tokens) 5) - (throw 'mcron-error 9 - "Not enough fields in Vixie-style time specification"))) - (let ((time-spec-list - (map-in-order (lambda (x) (vector - (let* ((n (vector-ref x 0)) - (tok (list-ref tokens n))) - (cond - ((and (= n 4) - (string=? tok "*") - (not (string=? - (list-ref tokens 2) "*"))) - '()) - ((and (= n 2) - (string=? tok "*") - (not (string=? - (list-ref tokens 4) "*"))) - '()) - (else - (parse-vixie-element - tok - (vector-ref x 1) - (vector-ref x 2))))) ; [0] - (vector-ref x 3) - (vector-ref x 4))) - ;; token range-top+1 getter setter - `( #( 0 0 60 ,tm:min ,set-tm:min ) - #( 1 0 24 ,tm:hour ,set-tm:hour ) - #( 2 1 32 ,tm:mday ,set-tm:mday ) - #( 3 0 12 ,tm:mon ,set-tm:mon ) - #( 4 0 7 ,tm:wday ,set-tm:wday ))))) ;; [1] - - (vector-set! (car (last-pair time-spec-list)) - 0 - (map (lambda (time-spec) - (if (eqv? time-spec 7) 0 time-spec)) - (vector-ref (car (last-pair time-spec-list)) 0))) ;; [2] - - (vector-set! (caddr time-spec-list) - 0 - (remove (lambda (day) (eqv? day 0)) - (vector-ref (caddr time-spec-list) 0))) ;; [2.1] - - - (lambda (current-time) ;; [3] - (let ((time (localtime current-time))) ;; [4] - - (if (not (member (tm:mon time) - (time-spec:list (cadddr time-spec-list)))) - (begin - (nudge-month! time (cdddr time-spec-list)) - (set-tm:mday time 0))) - (if (or (eqv? (tm:mday time) 0) - (not (member (tm:mday time) - (interpolate-weekdays - (time-spec:list (caddr time-spec-list)) - (time-spec:list (caddr (cddr time-spec-list))) - (tm:mon time) - (tm:year time))))) - (begin - (nudge-day! time (cddr time-spec-list)) - (set-tm:hour time -1))) - (if (not (member (tm:hour time) - (time-spec:list (cadr time-spec-list)))) - (begin - (nudge-hour! time (cdr time-spec-list)) - (set-tm:min time -1))) ;; [5] - - (set-tm:sec time 0) - (nudge-min! time time-spec-list) ;; [6] - (car (mktime time))))))) ;; [7] - - -- cgit v1.2.3