From 7ed303705c17b127cc224ee1ddecc53a931d65e5 Mon Sep 17 00:00:00 2001 From: Mathieu Lirzin Date: Wed, 22 Jul 2015 01:00:45 +0200 Subject: build: Generate 'ChangeLog' upon 'make dist'. * ChangeLog: Rename to ... * ChangeLog.old: ... this. * ChangeLog: New file. * Makefile.am (gen_start_date): New variable. (gen-ChangeLog, dist-hook): New targets. (EXTRA_DIST): Add 'ChangeLog.old'. * build-aux/gitlog-to-changelog: New file, from Gnulib. --- ChangeLog | 167 +------------- ChangeLog.old | 147 +++++++++++++ build-aux/gitlog-to-changelog | 492 ++++++++++++++++++++++++++++++++++++++++++ makefile.am | 17 +- 4 files changed, 658 insertions(+), 165 deletions(-) create mode 100644 ChangeLog.old create mode 100755 build-aux/gitlog-to-changelog diff --git a/ChangeLog b/ChangeLog index 15e01c0..fe5459d 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,165 +1,4 @@ -2014-05-25 Dale Mellor +Normally a ChangeLog is generated at "make dist" time and available in +source tarballs. - * Juggled build infrastructure so that we can make the minimal man - page in the proper autotools way. - - * configure.ac: version to 1.0.8. - - -2014-04-28 Dale Mellor - - * We now run against, and require, guile-2.0. - - * configure.ac: version to 1.0.7. - - -2012-02-04 Dale Mellor - - * main.scm: added search for initial files in - $XDG_CONFIG_HOME/cron directory, defaulting to ~/.config/cron if - the environment variable is not set) as well as in ~/.cron - directory (this is in line with the current FreeDesktop.org - standards). - - -2010-06-13 Dale Mellor - - * configure.ac: added --enable-no-vixie-clobber argument to - configure so that the root user can avoid overwriting a legacy - cron installation. - - * mcron.1: added simple, minimal man page using help2man (the - texinfo file is still the primary documentation source). - - * makefile.am: replaced use of mkinstalldirs with install; the - former is not supplied with the latest automake (1.11). - - -2008-02-21 Dale Mellor - - * ALL FILES: Replaced version 2 GPL notices with version 3 ones. - - * makefile.am: Do not remove COPYING file with make - maintainer-clean; if you do it will eventually get replaced with - the old version 2 GPL by a subsequent automake. - - * configure.ac: Bumped version to 1.0.4. - - -2008-01-25 Dale Mellor - - * main.scm (command-type): Files which are listed on the command - line are assumed to be guile configurations if they do not end in - .guile or .vixie (previously they were silently ignored). - - * main.scm: Argument to --schedule is no longer optional (the - options system goes really screwy with optional values, usually - pulling the first non-option argument as a value if one was not - intended!) - - * makefile.am: Moved target-specific CFLAGS and LDFLAGS to global - AM_* variables, to remove problem with automake requiring - AM_PROGS_CC_C_O in configure.ac (!) - - * Version is currently at 1.0.3. - - -2005-09-02 Dale Mellor - - * makefile.am, mcron.c.template (main): Modified install-exec-hook - so that a proper installation of a Vixie-compatible cron only - takes place if we are root - otherwise only mcron is installed as - a user-owned program. The guile modules are now installed under - mcron's shared data directory, not guile's global directories. - - * mcron-core.scm: Removed job:advance-time, put the code inline - where it was called, and changed the instance in the main loop to - compute the new time based on the current-time, rather than the - previous job time (this makes things behave more reasonably when a - laptop awakes from suspend mode). - - * Bumped version to 1.0.2. - - -2004-05-15 Dale Mellor - - * Modified all auxiliary files to reflect that the package is now - properly homed at www.gnu.org. - - * Bumped version to 1.0.1. - - -2003-12-11 Dale Mellor - - * Modified all auxiliary files to reflect that we are now a GNU - package. - - * Bumped version to 1.0.0. - - -2003-12-07 Dale Mellor - - * configure.ac: Added switches for files and directories used by - mcron: --spool-dir, --socket-file, --allow-file, --deny-file, - --pid-file and --tmp-dir. All the code has been modified to use - these configure options (including the source for the texinfo - manual). - - -2003-12-05 Dale Mellor - - * configure.ac: Added test for guile version >= 1.6.4. - - * bumped version to 0.99.4. - - -2003-08-03 Dale Mellor - - * Third cut, fully functional, modular, production quality, still - needs testing... - - * Pulled all functionality into modules, so it can be incorporated - into other programs. - - * Bumped version to 0.99.3. - - -2003-07-20 Dale Mellor - - * Second cut, now _really_ fully functional (100% Vixie - compatible), production quality code, still needs lots of testing - doing... - - * Converted from SIGUP-/var/cron/update to select-/var/cron/socket - method of communication between crontab and cron. - - * Added implicit job which checks every minute for updates to - /etc/crontab. - - * Removed --enable-vixie configuration option - the Vixie programs - are built and installed by default now. - - * Bumped version to 0.99.2. - - -2003-06-28 Dale Mellor - - * First cut, fully functional, production quality code, just needs - testing... - - * Broken/incomplete Guile prevents vixie compatibility from - working - this has been disabled by default in the configuration. - - * Version set at 0.99.1 - - - - - - -________________________________________________________________________________ -Copyright (C) 2003, 2005, 2006, 2014 Dale Mellor - -Copying and distribution of this file, with or without modification, -are permitted in any medium without royalty provided the copyright -notice and this notice are preserved. +If not, see the Git commit log at . diff --git a/ChangeLog.old b/ChangeLog.old new file mode 100644 index 0000000..09c4147 --- /dev/null +++ b/ChangeLog.old @@ -0,0 +1,147 @@ +2014-05-25 Dale Mellor + + * Juggled build infrastructure so that we can make the minimal man + page in the proper autotools way. + + * configure.ac: version to 1.0.8. + +2014-04-28 Dale Mellor + + * We now run against, and require, guile-2.0. + + * configure.ac: version to 1.0.7. + +2012-02-04 Dale Mellor + + * main.scm: added search for initial files in + $XDG_CONFIG_HOME/cron directory, defaulting to ~/.config/cron if + the environment variable is not set) as well as in ~/.cron + directory (this is in line with the current FreeDesktop.org + standards). + +2010-06-13 Dale Mellor + + * configure.ac: added --enable-no-vixie-clobber argument to + configure so that the root user can avoid overwriting a legacy + cron installation. + + * mcron.1: added simple, minimal man page using help2man (the + texinfo file is still the primary documentation source). + + * makefile.am: replaced use of mkinstalldirs with install; the + former is not supplied with the latest automake (1.11). + +2008-02-21 Dale Mellor + + * ALL FILES: Replaced version 2 GPL notices with version 3 ones. + + * makefile.am: Do not remove COPYING file with make + maintainer-clean; if you do it will eventually get replaced with + the old version 2 GPL by a subsequent automake. + + * configure.ac: Bumped version to 1.0.4. + +2008-01-25 Dale Mellor + + * main.scm (command-type): Files which are listed on the command + line are assumed to be guile configurations if they do not end in + .guile or .vixie (previously they were silently ignored). + + * main.scm: Argument to --schedule is no longer optional (the + options system goes really screwy with optional values, usually + pulling the first non-option argument as a value if one was not + intended!) + + * makefile.am: Moved target-specific CFLAGS and LDFLAGS to global + AM_* variables, to remove problem with automake requiring + AM_PROGS_CC_C_O in configure.ac (!) + + * Version is currently at 1.0.3. + +2005-09-02 Dale Mellor + + * makefile.am, mcron.c.template (main): Modified install-exec-hook + so that a proper installation of a Vixie-compatible cron only + takes place if we are root - otherwise only mcron is installed as + a user-owned program. The guile modules are now installed under + mcron's shared data directory, not guile's global directories. + + * mcron-core.scm: Removed job:advance-time, put the code inline + where it was called, and changed the instance in the main loop to + compute the new time based on the current-time, rather than the + previous job time (this makes things behave more reasonably when a + laptop awakes from suspend mode). + + * Bumped version to 1.0.2. + +2004-05-15 Dale Mellor + + * Modified all auxiliary files to reflect that the package is now + properly homed at www.gnu.org. + + * Bumped version to 1.0.1. + +2003-12-11 Dale Mellor + + * Modified all auxiliary files to reflect that we are now a GNU + package. + + * Bumped version to 1.0.0. + +2003-12-07 Dale Mellor + + * configure.ac: Added switches for files and directories used by + mcron: --spool-dir, --socket-file, --allow-file, --deny-file, + --pid-file and --tmp-dir. All the code has been modified to use + these configure options (including the source for the texinfo + manual). + +2003-12-05 Dale Mellor + + * configure.ac: Added test for guile version >= 1.6.4. + + * bumped version to 0.99.4. + +2003-08-03 Dale Mellor + + * Third cut, fully functional, modular, production quality, still + needs testing... + + * Pulled all functionality into modules, so it can be incorporated + into other programs. + + * Bumped version to 0.99.3. + +2003-07-20 Dale Mellor + + * Second cut, now _really_ fully functional (100% Vixie + compatible), production quality code, still needs lots of testing + doing... + + * Converted from SIGUP-/var/cron/update to select-/var/cron/socket + method of communication between crontab and cron. + + * Added implicit job which checks every minute for updates to + /etc/crontab. + + * Removed --enable-vixie configuration option - the Vixie programs + are built and installed by default now. + + * Bumped version to 0.99.2. + +2003-06-28 Dale Mellor + + * First cut, fully functional, production quality code, just needs + testing... + + * Broken/incomplete Guile prevents vixie compatibility from + working - this has been disabled by default in the configuration. + + * Version set at 0.99.1 + +________________________________________________________________________________ +Copyright (C) 2003, 2005, 2006, 2014, 2015 Dale Mellor + +Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. diff --git a/build-aux/gitlog-to-changelog b/build-aux/gitlog-to-changelog new file mode 100755 index 0000000..8f38318 --- /dev/null +++ b/build-aux/gitlog-to-changelog @@ -0,0 +1,492 @@ +eval '(exit $?0)' && eval 'exec perl -wS "$0" ${1+"$@"}' + & eval 'exec perl -wS "$0" $argv:q' + if 0; +# Convert git log output to ChangeLog format. + +my $VERSION = '2015-07-21 22:45'; # UTC +# The definition above must lie within the first 8 lines in order +# for the Emacs time-stamp write hook (at end) to update it. +# If you change this file with Emacs, please let the write hook +# do its job. Otherwise, update this string manually. + +# Copyright (C) 2008-2015 Free Software Foundation, Inc. + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# Written by Jim Meyering + +use strict; +use warnings; +use Getopt::Long; +use POSIX qw(strftime); + +(my $ME = $0) =~ s|.*/||; + +# use File::Coda; # http://meyering.net/code/Coda/ +END { + defined fileno STDOUT or return; + close STDOUT and return; + warn "$ME: failed to close standard output: $!\n"; + $? ||= 1; +} + +sub usage ($) +{ + my ($exit_code) = @_; + my $STREAM = ($exit_code == 0 ? *STDOUT : *STDERR); + if ($exit_code != 0) + { + print $STREAM "Try '$ME --help' for more information.\n"; + } + else + { + print $STREAM < ChangeLog + $ME -- -n 5 foo > last-5-commits-to-branch-foo + +SPECIAL SYNTAX: + +The following types of strings are interpreted specially when they appear +at the beginning of a log message line. They are not copied to the output. + + Copyright-paperwork-exempt: Yes + Append the "(tiny change)" notation to the usual "date name email" + ChangeLog header to mark a change that does not require a copyright + assignment. + Co-authored-by: Joe User + List the specified name and email address on a second + ChangeLog header, denoting a co-author. + Signed-off-by: Joe User + These lines are simply elided. + +In a FILE specified via --amend, comment lines (starting with "#") are ignored. +FILE must consist of pairs where SHA is a 40-byte SHA1 (alone on +a line) referring to a commit in the current project, and CODE refers to one +or more consecutive lines of Perl code. Pairs must be separated by one or +more blank line. + +Here is sample input for use with --amend=FILE, from coreutils: + +3a169f4c5d9159283548178668d2fae6fced3030 +# fix typo in title: +s/all tile types/all file types/ + +1379ed974f1fa39b12e2ffab18b3f7a607082202 +# Due to a bug in vc-dwim, I mis-attributed a patch by Paul to myself. +# Change the author to be Paul. Note the escaped "@": +s,Jim .*>,Paul Eggert , + +EOF + } + exit $exit_code; +} + +# If the string $S is a well-behaved file name, simply return it. +# If it contains white space, quotes, etc., quote it, and return the new string. +sub shell_quote($) +{ + my ($s) = @_; + if ($s =~ m![^\w+/.,-]!) + { + # Convert each single quote to '\'' + $s =~ s/\'/\'\\\'\'/g; + # Then single quote the string. + $s = "'$s'"; + } + return $s; +} + +sub quoted_cmd(@) +{ + return join (' ', map {shell_quote $_} @_); +} + +# Parse file F. +# Comment lines (starting with "#") are ignored. +# F must consist of pairs where SHA is a 40-byte SHA1 +# (alone on a line) referring to a commit in the current project, and +# CODE refers to one or more consecutive lines of Perl code. +# Pairs must be separated by one or more blank line. +sub parse_amend_file($) +{ + my ($f) = @_; + + open F, '<', $f + or die "$ME: $f: failed to open for reading: $!\n"; + + my $fail; + my $h = {}; + my $in_code = 0; + my $sha; + while (defined (my $line = )) + { + $line =~ /^\#/ + and next; + chomp $line; + $line eq '' + and $in_code = 0, next; + + if (!$in_code) + { + $line =~ /^([0-9a-fA-F]{40})$/ + or (warn "$ME: $f:$.: invalid line; expected an SHA1\n"), + $fail = 1, next; + $sha = lc $1; + $in_code = 1; + exists $h->{$sha} + and (warn "$ME: $f:$.: duplicate SHA1\n"), + $fail = 1, next; + } + else + { + $h->{$sha} ||= ''; + $h->{$sha} .= "$line\n"; + } + } + close F; + + $fail + and exit 1; + + return $h; +} + +# git_dir_option $SRCDIR +# +# From $SRCDIR, the --git-dir option to pass to git (none if $SRCDIR +# is undef). Return as a list (0 or 1 element). +sub git_dir_option($) +{ + my ($srcdir) = @_; + my @res = (); + if (defined $srcdir) + { + my $qdir = shell_quote $srcdir; + my $cmd = "cd $qdir && git rev-parse --show-toplevel"; + my $qcmd = shell_quote $cmd; + my $git_dir = qx($cmd); + defined $git_dir + or die "$ME: cannot run $qcmd: $!\n"; + $? == 0 + or die "$ME: $qcmd had unexpected exit code or signal ($?)\n"; + chomp $git_dir; + push @res, "--git-dir=$git_dir/.git"; + } + @res; +} + +{ + my $since_date; + my $until_date; + my $format_string = '%s%n%b%n'; + my $amend_file; + my $append_dot = 0; + my $cluster = 1; + my $ignore_matching; + my $ignore_line; + my $strip_tab = 0; + my $strip_cherry_pick = 0; + my $srcdir; + GetOptions + ( + help => sub { usage 0 }, + version => sub { print "$ME version $VERSION\n"; exit }, + 'since=s' => \$since_date, + 'until=s' => \$until_date, + 'format=s' => \$format_string, + 'amend=s' => \$amend_file, + 'append-dot' => \$append_dot, + 'cluster!' => \$cluster, + 'ignore-matching=s' => \$ignore_matching, + 'ignore-line=s' => \$ignore_line, + 'strip-tab' => \$strip_tab, + 'strip-cherry-pick' => \$strip_cherry_pick, + 'srcdir=s' => \$srcdir, + ) or usage 1; + + defined $since_date + and unshift @ARGV, "--since=$since_date"; + defined $until_date + and unshift @ARGV, "--until=$until_date"; + + # This is a hash that maps an SHA1 to perl code (i.e., s/old/new/) + # that makes a correction in the log or attribution of that commit. + my $amend_code = defined $amend_file ? parse_amend_file $amend_file : {}; + + my @cmd = ('git', + git_dir_option $srcdir, + qw(log --log-size), + '--pretty=format:%H:%ct %an <%ae>%n%n'.$format_string, @ARGV); + open PIPE, '-|', @cmd + or die ("$ME: failed to run '". quoted_cmd (@cmd) ."': $!\n" + . "(Is your Git too old? Version 1.5.1 or later is required.)\n"); + + my $prev_multi_paragraph; + my $prev_date_line = ''; + my @prev_coauthors = (); + my @skipshas = (); + while (1) + { + defined (my $in = ) + or last; + $in =~ /^log size (\d+)$/ + or die "$ME:$.: Invalid line (expected log size):\n$in"; + my $log_nbytes = $1; + + my $log; + my $n_read = read PIPE, $log, $log_nbytes; + $n_read == $log_nbytes + or die "$ME:$.: unexpected EOF\n"; + + # Extract leading hash. + my ($sha, $rest) = split ':', $log, 2; + defined $sha + or die "$ME:$.: malformed log entry\n"; + $sha =~ /^[0-9a-fA-F]{40}$/ + or die "$ME:$.: invalid SHA1: $sha\n"; + + my $skipflag = 0; + if (@skipshas) + { + foreach(@skipshas) + { + if ($sha =~ /^$_/) + { + $skipflag = 1; + ## Perhaps only warn if a pattern matches more than once? + warn "$ME: warning: skipping $sha due to $_\n"; + last; + } + } + } + + # If this commit's log requires any transformation, do it now. + my $code = $amend_code->{$sha}; + if (defined $code) + { + eval 'use Safe'; + my $s = new Safe; + # Put the unpreprocessed entry into "$_". + $_ = $rest; + + # Let $code operate on it, safely. + my $r = $s->reval("$code") + or die "$ME:$.:$sha: failed to eval \"$code\":\n$@\n"; + + # Note that we've used this entry. + delete $amend_code->{$sha}; + + # Update $rest upon success. + $rest = $_; + } + + # Remove lines inserted by "git cherry-pick". + if ($strip_cherry_pick) + { + $rest =~ s/^\s*Conflicts:\n.*//sm; + $rest =~ s/^\s*\(cherry picked from commit [\da-f]+\)\n//m; + } + + my @line = split /\s*\n/, $rest; + my $author_line = shift @line; + defined $author_line + or die "$ME:$.: unexpected EOF\n"; + $author_line =~ /^(\d+) (.*>)$/ + or die "$ME:$.: Invalid line " + . "(expected date/author/email):\n$author_line\n"; + + # Format 'Copyright-paperwork-exempt: Yes' as a standard ChangeLog + # `(tiny change)' annotation. + my $tiny = (grep (/^(?:Copyright-paperwork-exempt|Tiny-change):\s+[Yy]es$/, @line) + ? ' (tiny change)' : ''); + + my $date_line = sprintf "%s %s$tiny\n", + strftime ("%Y-%m-%d", localtime ($1)), $2; + + my @coauthors = grep /^Co-authored-by:.*$/, @line; + # Omit meta-data lines we've already interpreted. + @line = grep !/^(?:Signed-off-by:[ ].*>$ + |Co-authored-by:[ ] + |Copyright-paperwork-exempt:[ ] + |Tiny-change:[ ] + )/x, @line; + + # Remove leading and trailing blank lines. + if (@line) + { + while ($line[0] =~ /^\s*$/) { shift @line; } + while ($line[$#line] =~ /^\s*$/) { pop @line; } + } + + # Handle Emacs gitmerge.el "skipped" commits. + # Yes, this should be controlled by an option. So sue me. + if ( grep /^(; )?Merge from /, @line ) + { + my $found = 0; + foreach (@line) + { + if (grep /^The following commit.*skipped:$/, $_) + { + $found = 1; + ## Reset at each merge to reduce chance of false matches. + @skipshas = (); + next; + } + if ($found && $_ =~ /^([0-9a-fA-F]{7,}) [^ ]/) + { + push ( @skipshas, $1 ); + } + } + } + + # Ignore commits that match the --ignore-matching pattern, if specified. + if (! ($skipflag || (defined $ignore_matching + && @line && $line[0] =~ /$ignore_matching/))) + { + if (defined $ignore_line && @line) + { + @line = grep ! /$ignore_line/, @line; + while ($line[$#line] =~ /^\s*$/) { pop @line; } + } + + # Record whether there are two or more paragraphs. + my $multi_paragraph = grep /^\s*$/, @line; + + # Format 'Co-authored-by: A U Thor ' lines in + # standard multi-author ChangeLog format. + for (@coauthors) + { + s/^Co-authored-by:\s*/\t /; + s/\s*/ + or warn "$ME: warning: missing email address for " + . substr ($_, 5) . "\n"; + } + + # If clustering of commit messages has been disabled, if this header + # would be different from the previous date/name/etc. header, + # or if this or the previous entry consists of two or more paragraphs, + # then print the header. + if ( ! $cluster + || $date_line ne $prev_date_line + || "@coauthors" ne "@prev_coauthors" + || $multi_paragraph + || $prev_multi_paragraph) + { + $prev_date_line eq '' + or print "\n"; + print $date_line; + @coauthors + and print join ("\n", @coauthors), "\n"; + } + $prev_date_line = $date_line; + @prev_coauthors = @coauthors; + $prev_multi_paragraph = $multi_paragraph; + + # If there were any lines + if (@line == 0) + { + warn "$ME: warning: empty commit message:\n $date_line\n"; + } + else + { + if ($append_dot) + { + # If the first line of the message has enough room, then + if (length $line[0] < 72) + { + # append a dot if there is no other punctuation or blank + # at the end. + $line[0] =~ /[[:punct:]\s]$/ + or $line[0] .= '.'; + } + } + + # Remove one additional leading TAB from each line. + $strip_tab + and map { s/^\t// } @line; + + # Prefix each non-empty line with a TAB. + @line = map { length $_ ? "\t$_" : '' } @line; + + print "\n", join ("\n", @line), "\n"; + } + } + + defined ($in = ) + or last; + $in ne "\n" + and die "$ME:$.: unexpected line:\n$in"; + } + + close PIPE + or die "$ME: error closing pipe from " . quoted_cmd (@cmd) . "\n"; + # FIXME-someday: include $PROCESS_STATUS in the diagnostic + + # Complain about any unused entry in the --amend=F specified file. + my $fail = 0; + foreach my $sha (keys %$amend_code) + { + warn "$ME:$amend_file: unused entry: $sha\n"; + $fail = 1; + } + + exit $fail; +} + +# Local Variables: +# mode: perl +# indent-tabs-mode: nil +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "my $VERSION = '" +# time-stamp-format: "%:y-%02m-%02d %02H:%02M" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "'; # UTC" +# End: diff --git a/makefile.am b/makefile.am index da26a89..61fbe56 100644 --- a/makefile.am +++ b/makefile.am @@ -26,7 +26,7 @@ CP = @CP@ CLEANFILES = mcron.c -EXTRA_DIST = makefile.ed mcron.c.template BUGS +EXTRA_DIST = makefile.ed mcron.c.template BUGS ChangeLog.old info_TEXINFOS = doc/mcron.texi doc_mcron_TEXINFOS = doc/fdl.texi @@ -46,6 +46,21 @@ mcron.c : scm/mcron/main.scm scm/mcron/crontab.scm makefile.ed mcron.c.template @$(ED) < makefile.ed > /dev/null 2>&1 @rm -f mcron.escaped.scm > /dev/null 2>&1 +dist-hook: gen-ChangeLog + +gen_start_date = 2015-06-26 +.PHONY: gen-ChangeLog +gen-ChangeLog: + $(AM_V_GEN)if test -d $(srcdir)/.git; then \ + log_fix="$(srcdir)/build-aux/git-log-fix"; \ + test -e "$$log_fix" \ + && amend_git_log="--amend=$$log_fix" \ + || amend_git_log=; \ + $(top_srcdir)/build-aux/gitlog-to-changelog \ + $$amend_git_log --since=$(gen_start_date) > $(distdir)/cl-t && \ + { rm -f $(distdir)/ChangeLog && \ + mv $(distdir)/cl-t $(distdir)/ChangeLog; } \ + fi #full program prefix fpp = $(DESTDIR)$(bindir)/@real_program_prefix@ -- cgit v1.2.3