Revert "Fix build of the manual."

This reverts commit e6a94adeb3384cb883f49ec5a4cc589df6b40d10.

1 files changed, 0 insertions, 1337 deletions

diff --git a/doc/mcron.texi b/doc/mcron.texi
deleted file mode 100644
index cb97a06..0000000
--- a/doc/mcron.texi
+++ /dev/null
@@ -1,1337 +0,0 @@
-\input texinfo
-@c %**start of header
-@setfilename mcron.info
-@include config.texi
-@include version.texi
-@settitle mcron @value{VERSION}
-@c %**end of header
-
-@syncodeindex fn cp
-
-@copying This manual is for GNU mcron (version @value{VERSION}), which is a
-program for running jobs at scheduled times.
-
-Copyright @copyright{}  2003, 2005, 2006, 2012, 2014  Dale Mellor
-
-@quotation
-Permission is granted to copy, distribute and/or modify this
-document under the terms of the GNU Free Documentation License,
-Version 1.3 or any later version published by the Free Software
-Foundation; with no Invariant Sections, no Front-Cover Texts and
-no Back-Cover Texts.  A copy of the license is included in the
-section entitled ``GNU Free Documentation License''.
-@end quotation
-@end copying
-
-
-@ifinfo
-
-@dircategory Individual utilities
-
-@direntry
-* mcron: (mcron).       Run jobs at scheduled times.
-@end direntry
-
-@end ifinfo
-
-
-@titlepage
-@title mcron - Mellor's cron daemon
-@author Dale Mellor
-
-@page
-@vskip 0pt plus 1fill
-@c @insertcopying
-
-@end titlepage
-
-@contents
-
-@ifnottex
-@node Top, Introduction, (dir), (dir)
-@top mcron
-
-This file documents the @code{mcron} command (Mellor's cron) for
-running jobs at scheduled times.
-
-@c @insertcopying
-@end ifnottex
-
-@menu
-* Introduction::                Introducing mcron.
-* Simple examples::             How to use mcron 99.9% of the time.
-* Syntax::                      All the possibilities for configuring cron jobs.
-* Invoking::                    What happens when you run the mcron command.
-* Guile modules::               Incorporating mcron into another Guile program.
-* Index::                       The complete index.
-
-@detailmenu
- --- The Detailed Node Listing ---
-
-Simple examples
-
-* Guile Simple Examples::
-* Vixie Simple Examples::
-
-Full available syntax
-
-* Guile Syntax::
-* Extended Guile examples::
-* Vixie Syntax::
-
-Extended Guile examples
-
-* AT commands::
-* Every second Sunday::
-* Two hours every day::
-* Missing the first appointment::
-* Penultimate day of every month::
-
-Vixie
-
-* Paul Vixie's copyright::
-* Crontab file::
-* Incompatibilities with old Unices::
-
-Detailed invoking
-
-* Invoking mcron::
-* Invoking cron or crond::
-* Invoking crontab::
-* Behaviour on laptops::
-* Exit codes::
-
-Guile modules
-
-* The core module::             The job list and execution loop.
-* The redirect module::         Sending output of jobs to a mail box.
-* The vixie-time module::       Parsing vixie-style time specifications.
-* The job-specifier module::    All commands for scheme configuration files.
-* The vixie-specification module::  Commands for reading vixie-style crontabs.
-
-@end detailmenu
-@end menu
-
-@node Introduction, Simple examples, Top, Top
-@chapter Introducing mcron
-@cindex introduction
-@cindex mcron
-The mcron program represents a complete re-think of the cron concept
-originally found in the Berkeley and AT&T unices, and subsequently
-rationalized by Paul Vixie.  The original idea was to have a daemon
-that wakes up every minute, scans a set of files under a special
-directory, and determines from those files if any shell commands
-should be executed in this minute.
-
-The new idea is to read the required command instructions, work out
-which command needs to be executed next, and then sleep until the
-inferred time has arrived.  On waking the commands are run, and the
-time of the next command is computed.  Furthermore, the specifications
-are written in scheme, allowing at the same time simple command
-execution instructions and very much more flexible ones to be composed
-than the original Vixie format.  This has several useful advantages
-over the original idea.  (Changes to user crontabs are signalled
-directly to mcron by the crontab program; cron must still scan the
-/etc/crontab file once every minute, although use of this file is
-highly discouraged and this behaviour can be turned off).
-
-@cindex advantages of mcron
-@itemize @bullet
-@item
-Does not consume CPU resources when not needed.  Many cron daemons only
-run jobs once an hour, or even just once a day.
-@item
-Can easily allow for finer time-points to be specified,
-i.e. seconds.  In principle this could be extended to microseconds, but
-this is not implemented.
-@item
-Times can be more or less regular.  For example, a job that runs
-every 17 hours can be specified, or a job that runs on the first
-Sunday of every month.
-@item
-Times can be dynamic.  Arbitrary Guile (scheme) code can be provided to
-compute the next time that a command needs to be run.  This could, for
-example, take the system load into consideration.
-@item
-Turns out to be easy to provide complete backwards compatibility with
-Vixie cron.
-@item
-Each user looks after his own files in his own directory.  He can use
-more than one to break up complicated cron specifications.
-@item
-Each user can run his own daemon.  This removes the need for suid
-programs to manipulate the crontabs, and eliminates many security
-concerns that surround all existing cron programs.
-@item
-The user can obtain an advance schedule of all the jobs that are due
-to run.
-@item
-Vixie cron is implemented in 4500 lines of C code; mcron is 2000 lines
-of scheme, despite the fact that it offers many more features and much
-more flexibility, and complete compatibility with Vixie cron.
-@end itemize
-
-A full discussion of the design and philosophy of mcron can be found
-in the white paper at
-@url{http://www.gnu.org/software/mcron/design.html}.
-
-
-@node Simple examples, Syntax, Introduction, Top
-@chapter Simple examples
-The vast majority of uses of cron are sublimely simple: run a program
-every hour, or every day.  With this in mind the design of mcron has
-been to allow such simple specifications to be made easily.  The
-examples show how to create the command descriptions, and subsequently
-how to run mcron to make them happen.
-@menu
-* Guile Simple Examples::
-* Vixie Simple Examples::
-@end menu
-
-@node Guile Simple Examples, Vixie Simple Examples, Simple examples, Simple examples
-@section Guile
-@cindex guile examples
-@cindex examples, guile
-@cindex example, run a program every hour
-You have an executable @code{my-program} in your home directory, which
-you want to run every hour.  Create a file @code{job.guile} in
-directory @code{~/.config/cron} (this path may be altered by the
-@code{$XDG_CONFIG_HOME} environment variable) with the following
-contents
-
-@example
-(job '(next-hour) "my-program")
-@end example
-
-then run the command @code{mcron}.
-
-Want the program to run fifteen minutes past the hour, every two
-hours? Edit the file to read
-
-@example
-(job
-   '(next-minute-from
-      (next-hour (range 0 24 2))
-      15)
-   "my-program")
-@end example
-
-and run the command @code{mcron}.
-
-Or, if you are not comfortable with Scheme, you could use (and see
-also the next section)
-
-@example
-(job "15 */2 * * *" "my-program")
-@end example
-
-and run the @code{mcron} command.
-
-If you want to run other jobs, you can either add more lines to this
-file, or you can create other files in your @code{.config/cron} directory
-with the @code{.guile} extension.  Alternatively, you can use any file
-you want and pass it as an argument to @code{mcron}, or even pipe the
-commands into the standard input.
-
-
-@node Vixie Simple Examples,  , Guile Simple Examples, Simple examples
-@section Vixie
-@cindex examples
-@cindex examples, vixie
-@cindex vixie examples
-You have an executable @code{my-program} in your home directory, which
-you want to run every hour.  Create a file @code{job.vixie} in directory
-@code{~/.cron} with the following contents
-
-@example
-0 * * * * my-program
-@end example
-
-then run the command @code{mcron}.
-
-@cindex vixie compatibility
-@cindex compatibility
-Alternatively (full compatibility with Vixie cron), set your
-environment variable @code{EDITOR} to your favorite editor, run
-@code{crontab -e}, put the above line into the edit buffer, save and
-exit.  For this to work the @code{cron} daemon must be already running
-on your system, as root.
-
-@node Syntax, Invoking, Simple examples, Top
-@chapter Full available syntax
-@menu
-* Guile Syntax::
-* Extended Guile examples::
-* Vixie Syntax::
-@end menu
-@node Guile Syntax, Extended Guile examples, Syntax, Syntax
-@section Guile Syntax
-@subsection Job specification
-@cindex guile syntax
-@cindex syntax, guile
-@findex job
-In Guile-formatted configuration files each command that needs
-executing is introduced with the @code{job} function.  This function
-always takes two arguments, the first a time specification, and the
-second a command specification.  An optional third argument may contain
-a string to display when this job is listed in a schedule.
-
-@cindex time specification, procedure
-@cindex procedure time specification
-The first argument can be a procedure, a list, or a string.  If a
-function is supplied, it must take exactly one argument, which will be
-the ``current'' time in UNIX format, and the return value of the
-function must be the time in UNIX format when this action should next
-be run.  The following functions are available to facilitate the
-computation:
-
-@findex next-second-from
-@code{(next-second-from time . args)} without arguments this
-returns the second after the current one.  With the extra arguments,
-these form a list of seconds in the minute when the action should run,
-and the function will return the time of the next allowed second
-(which may be in the next minute of the hour).  @footnote{Note that
-while commands can be scheduled to run at any second, it is unlikely
-that they will be executed then but some time shortly thereafter,
-depending on the load on the system and the number of jobs that mcron
-has to start at the same time.}
-
-@findex next-minute-from
-@findex next-hour-from
-@findex next-day-from
-@findex next-week-from
-@findex next-month-from
-@findex next-year-from
-Similarly to @code{next-second-from}, there are also
-@code{next-minute-from}, @code{next-hour-from}, @code{next-day-from},
-@code{next-week-from}, @code{next-month-from}, @code{next-year-from}.
-
-@findex range
-Furthermore, the optional argument can be fulfilled by the function
-@code{(range start end . step)}, which will provide a list of values
-from start to (but not including) end, with the step if given.  For
-example @code{(range 0 10 2)} will yield the list @code{'(0 2 4 6 8)}.
-
-@findex next-second
-@findex next-minute
-@findex next-hour
-@findex next-day
-@findex next-week
-@findex next-month
-@findex next-year
-@cindex time specification, list
-@cindex list time specification
-If the first argument to the @code{job} function is a list, it is
-taken to be program code made up of the functions @code{(next-second
-. args)}, @code{(next-minute...)}, etc, where the optional arguments
-can be supplied with the @code{(range)} function above (these
-functions are analogous to the ones above except that they implicitly
-assume the current time; it is supplied by the mcron core when the
-list is eval'd).
-
-@cindex time specification
-@cindex time specification, string
-@cindex string time specification
-@cindex time specification, vixie-style
-@cindex vixie-style time specification
-If the first argument to the @code{job} function is a string, it is
-expected to be a Vixie cron-style time specification.  See the section
-on Vixie syntax for this.
-
-@cindex job execution
-@cindex command execution
-@cindex execution
-The second argument to the @code{(job)} function can be either a
-string, a list, or a function.  In all cases the command is executed in
-the user's home directory, under the user's own UID.  If a string is
-passed, it is assumed to be shell script and is executed with the
-user's default shell.  If a list is passed it is assumed to be scheme
-code and is eval'd as such.  A supplied function should take exactly
-zero arguments, and will be called at the pertinent times.
-
-@subsection Sending output as e-mail
-@cindex email output
-@cindex email from guile script
-@cindex standard input to commands
-@findex with-mail-out
-When jobs are specified in a vixie-style configuration, the command is
-broken at a percentage sign, and the stuff that comes after this is
-sent into the command's standard input.  Furthermore, any output from
-the command is mailed to the user.  This functionality is provided for
-compatibility with Vixie cron, but it is also available to scheme
-configuration files.  The command (with-mail-out action . user) can be
-used to direct output from the action (which may be a procedure, list,
-or string) into an e-mail to the user.
-
-In the case that the action is a string, then percentage signs are
-processed as per the vixie specifications, and information is piped to
-the shell command's standard input.
-
-@subsection Setting environment variables
-@cindex environment variables in scheme
-@cindex setting environment variables
-@findex append-environment-mods
-Also for compatibility with Vixie cron, mcron has the ability to set
-environment variables in configuration files.  To access this
-functionality from a scheme configuration file, use the command
-(append-environment-mods name value), where name is the name of an
-environment variable, and value is the value put to it.  A value of #f
-will remove the variable from the environment.
-
-Note that environment modifications are accumulated as the
-configuration file is processed, so when a job actually runs, its
-environment will be modified according to the modifications specified
-before the job specification in the configuration file.
-
-
-@node Extended Guile examples, Vixie Syntax, Guile Syntax, Syntax
-@section Extended Guile examples
-@cindex examples, extended guile
-@cindex extended guile examples
-While Guile gives you flexibility to do anything, and the power to
-represent complex requirements succinctly, things are not always as
-they seem.  The following examples illustrate some pitfalls, and
-demonstrate how to code around them.
-
-@menu
-* AT commands::
-* Every second Sunday::
-* Two hours every day::
-* Missing the first appointment::
-* Penultimate day of every month::
-@end menu
-
-@node AT commands, Every second Sunday, Extended Guile examples, Extended Guile examples
-@subsection Synthesizing ``at'' commands
-@cindex at command
-The current implementation of mcron does not provide for an at command
-(a command-line program that allows the user to specify that a job
-runs exactly once at a certain time).  This can, however, be achieved.
-
-Suppose the program @code{my-program} needs to be run at midnight
-tonight.  A Guile script like the following would work (but a printed
-schedule, obtained with the @code{--schedule} option, will show
-superfluous entries).
-
-@example
-(job '(next-day)
-     (lambda () (system "my-program")
-                (kill (getppid) SIGINT)))
-@end example
-
-@node Every second Sunday, Two hours every day, AT commands, Extended Guile examples
-@subsection Every second Sunday
-@cindex examples, every second sunday
-To run @code{my-program} on the second Sunday of every month, a Guile
-script like the following should suffice (it is left as an exercise to
-the student to understand how this works!).
-
-@example
-(job (lambda (current-time)
-       (let* ((next-month (next-month-from current-time))
-              (first-day (tm:wday (localtime next-month)))
-              (second-sunday (if (eqv? first-day 0)
-                                 8
-                                 (- 14 first-day))))
-         (+ next-month (* 24 60 60 second-sunday))))
-     "my-program")
-@end example
-
-
-@node Two hours every day, Missing the first appointment, Every second Sunday, Extended Guile examples
-@subsection Two hours every day
-@cindex examples, two hours every day
-@cindex pitfalls, two hours every day
-Surprisingly perhaps, the following will @strong{not} have the desired
-effect.
-
-@example
-(job '(next-hour-from (next-day) '(1 2))
-     "my-program")
-@end example
-
-Rather than running the my-program program at one o'clock and two
-o'clock every day, it will only run it at one o'clock.  This is because
-each time mcron has to compute the next time to run the command, it
-first obtains the next day, and then finds the earliest hour in that
-day to run at.  Thus, after running the command at one o'clock, the
-program first skips forwards to the next midnight (missing the two
-o'clock appointment), and then finds the next one o'clock schedule.
-
-The following simple command is the correct way to specify this
-behaviour.
-
-@example
-(job '(next-hour '(1 2)) "my-program")
-@end example
-
-
-@node Missing the first appointment, Penultimate day of every month, Two hours every day, Extended Guile examples
-@subsection Missing the first appointment
-@cindex examples, missing the first appointment
-@cindex pitfalls, missing the first appointment
-The command
-
-@example
-(job '(next-hour-from (next-day) '(16))
-     "my-program")
-@end example
-
-will run @code{my-program} every day at four o'clock in the
-afternoon.  However, if mcron is started with this script at midday,
-the first time the command will run will be four o'clock tomorrow;
-today's appointment will be missed (one time only).
-
-The correct way to specify this requirement is simply
-
-@example
-(job '(next-hour '(16))
-     "my-program")
-@end example
-
-
-@node Penultimate day of every month,  , Missing the first appointment, Extended Guile examples
-@subsection Penultimate day of every month
-@cindex examples, penultimate day of every month
-The following will run the @code{my-program} program on the
-second-to-last day of every month.
-
-@example
-(job '(- (next-month-from (next-month)) (* 48 3600))
-     "my-program")
-@end example
-
-
-
-@node Vixie Syntax,  , Extended Guile examples, Syntax
-@section Vixie
-@cindex syntax, vixie
-@cindex vixie syntax
-@cindex vixie definition
-@cindex vixie compatibility
-@cindex compatibility, vixie
-@emph{NOTE} that this section is definitive.  If there is a difference in
-behaviour between the mcron program and this part of the manual, then
-there is a bug in the program.  This section is also copied verbatim
-from Paul Vixie's documentation for his cron program, and his
-copyright notice is duly reproduced below.
-
-There are three problems with this specification.
-
-@cindex zero'th day of month
-@cindex 0'th day of month
-1.  It is allowed to specify days of the month in the range 0-31.  What
-does it mean to specify day 0? Looking at the Vixie source code, it
-seems that if this date appears as part of a list, it has no
-effect.  However, if it appears on its own, the effect is to say
-``don't run on any particular day of the month, only take the week-day
-specification into account.'' Mcron has been coded to mimic this
-behaviour as a special case (unmodified mcron logic implies that this
-date specification would cause jobs to run on the last day of the
-previous month).
-
-@cindex thirteenth month of year
-@cindex 13th month of year
-2.  Similarly to the above (but different), months of the year can be
-specified in the range 0-12.  In the case of mcron (don't know what
-Vixie cron did) month 12 will cause the program to wait until January
-of the following year (but don't rely on this).
-
-@cindex shell
-@cindex environment variables, shell
-@cindex /etc/passwd
-3.  Somewhere it says that cron sets the SHELL environment variable to
-/bin/sh, and elsewhere it implies that the default behaviour is for
-the user's default shell to be used to execute commands.  Mcron sets
-the variable and runs the command in the user's default shell, as
-advertised by the /etc/passwd file.
-
-@menu
-* Paul Vixie's copyright::
-* Crontab file::
-* Incompatibilities with old Unices::
-@end menu
-
-
-@node Paul Vixie's copyright, Crontab file, Vixie Syntax, Vixie Syntax
-@subsection Paul Vixie's copyright
-@cindex copyright, Paul Vixie's
-@cindex Paul Vixie's copyright
-@quotation
-Copyright 1988,1990,1993,1994 by Paul Vixie
-All rights reserved
-
-Distribute freely, except: don't remove my name from the source or
-documentation (don't take credit for my work), mark your changes (don't
-get me blamed for your possible bugs), don't alter or remove this
-notice.  May be sold if buildable source is provided to buyer.  No
-warrantee of any kind, express or implied, is included with this
-software; use at your own risk, responsibility for damages (if any) to
-anyone resulting from the use of this software rests entirely with the
-user.
-@end quotation
-
-
-
-
-@node  Crontab file, Incompatibilities with old Unices, Paul Vixie's copyright, Vixie Syntax
-@subsection Crontab files
-@cindex crontab file
-@cindex vixie crontab file
-A @code{crontab} file contains instructions to the @code{cron} daemon
-of the general form: ``run this command at this time on this date''.
-Each user has their own crontab, and commands in any given crontab
-will be executed as the user who owns the crontab.  Uucp and News will
-usually have their own crontabs, eliminating the need for explicitly
-running @code{su} as part of a cron command.
-
-@cindex comments, vixie-style
-Blank lines and leading spaces and tabs are ignored.  Lines whose first
-non-space character is a pound-sign (#) are comments, and are ignored.
-Note that comments are not allowed on the same line as cron commands, since
-they will be taken to be part of the command.  Similarly, comments are not
-allowed on the same line as environment variable settings.
-
-An active line in a crontab will be either an environment setting or a cron
-command.  An environment setting is of the form,
-
-@cindex environment setting, vixie-style
-@example
-name = value
-@end example
-
-where the spaces around the equal-sign (=) are optional, and any
-subsequent non-leading spaces in @code{value} will be part of the
-value assigned to @code{name}.  The @code{value} string may be placed
-in quotes (single or double, but matching) to preserve leading or
-trailing blanks.
-
-@cindex environment variables, SHELL
-@cindex environment variables, LOGNAME
-@cindex environment variables, HOME
-@cindex SHELL environment variable
-@cindex LOGNAME environment variable
-@cindex HOME environment variable
-@cindex /etc/passwd
-Several environment variables are set up automatically by the
-@code{cron} daemon.  SHELL is set to /bin/sh, and LOGNAME and HOME are
-set from the /etc/passwd line of the crontab's owner.  HOME and SHELL
-may be overridden by settings in the crontab; LOGNAME may not.
-
-@cindex environment variables, USER
-@cindex USER environment variable
-@cindex BSD
-(Another note: the LOGNAME variable is sometimes called USER on BSD systems...
-on these systems, USER will be set also.) @footnote{mcron has not been
-ported to BSD, so these notes are not relevant.}
-
-@cindex environment variables, MAILTO
-@cindex MAILTO environment variable
-In addition to LOGNAME, HOME, and SHELL, @code{cron} will look at
-MAILTO if it has any reason to send mail as a result of running
-commands in ``this'' crontab.  If MAILTO is defined (and non-empty),
-mail is sent to the user so named.  If MAILTO is defined but empty
-(MAILTO=""), no mail will be sent.  Otherwise mail is sent to the
-owner of the crontab.  This option is useful if you decide on
-/bin/mail instead of /usr/lib/sendmail as your mailer when you install
-cron -- /bin/mail doesn't do aliasing, and UUCP usually doesn't read
-its mail.
-
-The format of a cron command is very much the V7 standard, with a number of
-upward-compatible extensions.  Each line has five time and date fields,
-followed by a user name if this is the system crontab file,
-followed by a command.  Commands are executed by @code{cron}
-when the minute, hour, and month of year fields match the current
-time, @strong{and} when at least one of the two day fields (day of month, or day of week)
-match the current time (see ``Note'' below).  @code{cron} examines cron entries once every minute.
-The time and date fields are:
-
-@cindex vixie time specification fields
-@cindex fields, vixie time specification
-@multitable @columnfractions .2 .5
-@item Field @tab Allowed values
-@item ----- @tab --------------
-@item minute @tab 0-59
-@item hour @tab 0-23
-@item day of month @tab 0-31
-@item month @tab 0-12 (or names, see below)
-@item day of week @tab 0-7 (0 or 7 is Sun, or use names)
-@end multitable
-
-A field may be an asterisk (*), which always stands for ``first-last''.
-
-@cindex ranges in vixie time specifications
-Ranges of numbers are allowed.  Ranges are two numbers separated
-with a hyphen.  The specified range is inclusive.  For example,
-8-11 for an ``hours'' entry specifies execution at hours 8, 9, 10
-and 11.
-
-@cindex lists in vixie time specifications
-Lists are allowed.  A list is a set of numbers (or ranges)
-separated by commas.  Examples: ``1,2,5,9'', ``0-4,8-12''.
-
-@cindex steps in vixie time specifications
-Step values can be used in conjunction with ranges.  Following
-a range with ``/<number>'' specifies skips of the number's value
-through the range.  For example, ``0-23/2'' can be used in the hours
-field to specify command execution every other hour (the alternative
-in the V7 standard is ``0,2,4,6,8,10,12,14,16,18,20,22'').  Steps are
-also permitted after an asterisk, so if you want to say ``every two
-hours'', just use ``*/2''.
-
-@cindex names in vixie-style time specifications
-Names can also be used for the ``month'' and ``day of week''
-fields.  Use the first three letters of the particular
-day or month (case doesn't matter).  Ranges or
-lists of names are not allowed.  @footnote{Mcron allows any alphabetic
-characters after a name, so full names of days or months are also valid.}
-
-@cindex % character on vixie-style commands
-@cindex standard input, vixie-style
-The ``sixth'' field (the rest of the line) specifies the command to be
-run.
-The entire command portion of the line, up to a newline or %
-character, will be executed by /bin/sh or by the shell
-specified in the SHELL variable of the cronfile.
-Percent-signs (%) in the command, unless escaped with backslash
-(\\), will be changed into newline characters, and all data
-after the first % will be sent to the command as standard
-input.
-
-@cindex day specification, vixie-style
-@cindex vixie-style day specification
-Note: The day of a command's execution can be specified by two
-fields -- day of month, and day of week.  If both fields are
-restricted (ie, aren't *), the command will be run when
-@emph{either}
-field matches the current time.  For example,
-
-``30 4 1,15 * 5''
-
-would cause a command to be run at 4:30 am on the 1st and 15th of each
-month, plus every Friday.
-
-EXAMPLE CRON FILE
-
-@example
-# use /bin/sh to run commands, no matter what /etc/passwd says
-SHELL=/bin/sh
-# mail any output to `paul', no matter whose crontab this is
-MAILTO=paul
-#
-# run five minutes after midnight, every day
-5 0 * * *       $HOME/bin/daily.job >> $HOME/tmp/out 2>&1
-# run at 2:15pm on the first of every month -- output mailed to paul
-15 14 1 * *     $HOME/bin/monthly
-# run at 10 pm on weekdays, annoy Joe
-0 22 * * 1-5	mail -s "It's 10pm" joe%Joe,%%Where are your kids?%
-23 0-23/2 * * * echo "run 23 minutes after midn, 2am, 4am ..., everyday"
-5 4 * * sun     echo "run at 5 after 4 every sunday"
-@end example
-
-@node  Incompatibilities with old Unices,  , Crontab file, Vixie Syntax
-@subsection Extensions and incompatibilities
-@cindex incompatibilities with old Unices
-@cindex extensions, vixie over old Unices
-This section lists differences between Paul Vixie's cron and the
-olde-worlde BSD and AT&T programs, for the benefit of system
-administrators and users who are upgrading all the way.
-
-@itemize @bullet
-@item
-@cindex day 7
-When specifying day of week, both day 0 and day 7 will be considered Sunday.
-BSD and AT&T seem to disagree about this.
-
-@item
-Lists and ranges are allowed to co-exist in the same field.  "1-3,7-9" would
-be rejected by AT&T or BSD cron -- they want to see "1-3" or "7,8,9" ONLY.
-
-@item
-Ranges can include "steps", so "1-9/2" is the same as "1,3,5,7,9".
-
-@item
-Names of months or days of the week can be specified by name.
-
-@item
-Environment variables can be set in the crontab.  In BSD or AT&T, the
-environment handed to child processes is basically the one from /etc/rc.
-
-@item
-Command output is mailed to the crontab owner (BSD can't do this), can be
-mailed to a person other than the crontab owner (SysV can't do this), or the
-feature can be turned off and no mail will be sent at all (SysV can't do this
-either).
-
-@end itemize
-
-
-@node Invoking, Guile modules, Syntax, Top
-@chapter Detailed invoking
-@cindex invoking
-@cindex personality
-@cindex mcron program
-@cindex cron program
-@cindex crond program
-@cindex crontab program
-The program adopts one of three different personalities depending on
-the name used to invoke it.  In a standard installation, the program is
-installed in the system under the names mcron, cron and crontab
-(installed SUID).
-
-The recommended way to invoke the program is via the mcron personality
-described in the next section.  The program can also be run as cron by
-root, and by the SUID program crontab by individual users to gain
-backwards compatibility with Vixie cron.  However, due to the fact that
-this daemon process is shared by, and under control of, all the users
-of the system it is possible (though very unlikely) that it may become
-unusable, hence the recommendation to use the mcron personality.
-
-@cindex deprecated, vixie personality
-Furthermore, the Vixie personality is considered deprecated by this
-author (it offers not a single advantage over the mcron personality,
-and bloats the code by a factor of three).  It is unlikely that this
-personality will ever actually go away, but the program may in future
-be split into two distinct parts, and new developments will only take
-place in the part which implements the mcron personality.
-
-
-
-@menu
-* Invoking mcron::
-* Invoking cron or crond::
-* Invoking crontab::
-* Behaviour on laptops::
-* Exit codes::
-@end menu
-
-@node Invoking mcron, Invoking cron or crond, Invoking, Invoking
-@section Invoking mcron
-@cindex invoking mcron
-@cindex mcron options
-@cindex mcron arguments
-@cindex command line, mcron
-@cindex mcron command line
-Mcron should be run by the user who wants to schedule his jobs.  It
-may be made a background job using the facilities of the shell.  The
-basic command is @code{mcron [OPTION ...] [file ...]}  which has the
-effect of reading all the configuration files specified (subject to
-the options) and then waiting until it is time to execute some
-command.  If no files are given on the command line, then mcron will
-look in the user's cron configuration directories: these are ~/.cron
-(deprecated), the directory indicated by the @code{XDG_CONFIG_HOME}
-environment variable, or ~/.config/cron if this variable is not set.
-In any case, files which end in the extension .vixie or .vix will be
-assumed to contain Vixie-style crontabs, and files ending .guile or
-.gle will be assumed to contain scheme code and will be executed as
-such; ANY OTHER FILES WILL BE IGNORED - specify a file name of ``-''
-and then pipe the files into the standard input if you really want to
-read them, possibly using the @code{stdin} option to specify the type
-of file.
-
-The program accepts the following options.
-
-@table @option
-@item -s count
-@itemx --schedule=count
-@cindex printout of jobs schedule
-@cindex schedule of jobs, listing
-@cindex options, schedule
-@cindex options, -s
-@cindex -s option
-@cindex --schedule option
-With this option specified no commands are run.  Instead, the program
-computes the times the commands would be run and prints the
-information to the screen, and then immediately exits.
-
-The count indicates the number of commands to display.
-
-@cindex daemon option
-@cindex options, daemon
-@cindex options, -d
-@cindex -d option
-@cindex --daemon option
-@item -d
-@itemx --daemon
-With this option the program will detach itself from the controlling
-terminal and run as a daemon process.
-
-@cindex stdin option
-@cindex options, stdin
-@cindex options, -i
-@cindex -i option
-@cindex --stdin option
-@cindex standard input, configuring from
-@cindex configuring from standard input
-@item -i (vixie|guile)
-@itemx --stdin=(vixie|guile)
-This option is used to indicate whether the configuration information
-being passed on the standard input is in Vixie format or Guile
-format.  Guile is the default.
-
-@cindex -v option
-@cindex --version option
-@cindex options, -v
-@cindex options, version
-@item -v
-@itemx --version
-This option causes a message to be printed on the standard output with
-information about the version and copyright for the current program.
-
-@cindex -h option
-@cindex --help option
-@cindex options, -h
-@cindex options, --help
-@item -h
-@itemx --help
-This causes a short but complete usage message to be displayed on
-standard output.
-
-@end table
-
-@node Invoking cron or crond, Invoking crontab, Invoking mcron, Invoking
-@section Invoking cron or crond
-@cindex cron, invokation
-@cindex invoking cron
-@cindex crond, invokation
-@cindex invoking crond
-@cindex @value{CONFIG_SPOOL_DIR}
-@cindex @value{CONFIG_SOCKET_FILE}
-NOTE THAT THIS SECTION ONLY APPLIES IF THE @code{cron} or
-@code{crond}, and @code{crontab} PROGRAMS HAVE BEEN INSTALLED BY THE
-SYSTEM ADMINISTRATOR.
-
-If the program runs by the name of @code{cron} or @code{crond}, then
-it will read all the files in @code{@value{CONFIG_SPOOL_DIR}} (which
-should only be readable by root) and the file @code{/etc/crontab}, and
-then detaches itself from the terminal to live forever as a daemon
-process.  Additionally, it creates a UNIX socket at
-@code{@value{CONFIG_SOCKET_FILE}}, and listens for messages sent to
-that socket consisting of a user name whose crontabs have been
-changed.  In this case, the program will re-read that user's crontab.
-This is for correct functioning with the crontab program.
-
-Further, if the @code{--noetc} option was not used, a job is scheduled
-to run every minute to check if /etc/crontab has been modified
-recently.  If so, this file will also be re-read.
-
-The options which may be used with this program are as follows.
-
-@table @option
-
-@cindex -v option
-@cindex --version option
-@cindex options, -v
-@cindex options, version
-@item -v
-@itemx --version
-This option causes a message to be printed on the standard output with
-information about the version and copyright for the current program.
-
-@cindex -h option
-@cindex --help option
-@cindex options, -h
-@cindex options, --help
-@item -h
-@itemx --help
-This causes a short but complete usage message to be displayed on
-standard output.
-
-@item -s [count]
-@itemx --schedule[=count]
-@cindex printout of jobs schedule
-@cindex schedule of jobs, listing
-@cindex options, schedule
-@cindex options, -s
-@cindex -s option
-@cindex --schedule option
-With this option specified no commands are run.  Instead, the program
-computes the times the commands would be run and prints the
-information to the screen, and then immediately exits.
-
-The count, if supplied, indicates the number of commands to
-display.  The default value is 8.
-
-@cindex -n option
-@cindex --noetc option
-@cindex options, -n
-@cindex options, --noetc
-@item -n
-@itemx --noetc
-This tells cron not to add a job to the system which wakes up every
-minute to check for modifications to @code{/etc/crontab}.  It is
-recommended that this option be used (and further that the
-@code{/etc/crontab} file be taken off the system altogether!)
-
-@end table
-
-@node Invoking crontab, Behaviour on laptops, Invoking cron or crond, Invoking
-@section Invoking crontab
-@cindex crontab, invoking
-@cindex invoking crontab
-This program is run by individual users to inspect or modify their
-crontab files.  If a change is made to the file, then the root daemon
-process will be given a kick, and will immediately read the new
-configuration.  A warning will be issued to standard output if it
-appears that a cron daemon is not running.
-
-The command is used as
-
-@code{crontab [-u user] file}
-
-or
-
-@code{crontab [-u user] ( -l | -e | -r )}
-
-Only the root user can use the -u option, to specify the manipulation
-of another user's crontab file.  In the first instance, the entire
-crontab file of the user is replaced with the contents of the
-specified file, or standard input if the file is ``-''.
-
-In the latter case, the program behaves according to which of the
-(mutually exclusive) options was given (note that the long options are
-an mcron extension).
-
-@table @option
-
-@cindex -l option
-@cindex list option, crontab
-@cindex options, -l
-@cindex options, --list
-@cindex viewing a crontab
-@cindex listing a crontab
-@item -l
-@itemx --list
-Print the user's crontab file to the standard output, and exit.
-
-@cindex -r option
-@cindex remove option
-@cindex options, -r
-@cindex options, --remove
-@cindex deleting a crontab
-@cindex removing a crontab
-@item -r
-@item --remove
-Delete the user's crontab file, and exit.
-
-@cindex -e option
-@cindex edit option
-@cindex options, -e
-@cindex options, --edit
-@cindex editing a crontab
-@cindex creating a crontab
-@item -e
-@item --edit
-Using the editor specified in the user's VISUAL or EDITOR environment
-variables, allow the user to edit his crontab.  Once the user exits the
-editor, the crontab is checked for parseability, and if it is okay
-then it is installed as the user's new crontab and the daemon is
-notified that a change has taken place, so that the new file will
-become immediately effective.
-
-@end table
-
-
-@node Behaviour on laptops, Exit codes, Invoking crontab, Invoking
-@section Behaviour on laptops
-@cindex laptops
-@cindex power suspend
-While mcron has not been designed to work anachronistically, the behaviour of
-mcron when a laptop emerges from a suspended state is well defined, and the
-following description explains what happens in this situation.
-
-When a laptop awakes from a suspended state, all jobs which would have run while
-the laptop was suspended will run exactly once immediately (and simultaneously)
-when the laptop awakes, and then the next time that those jobs run will be
-computed based on the time the laptop was awoken.  Any jobs which would not have
-run during the suspense period will be unaffected, and will still run at their
-proper times.
-
-
-@node Exit codes,  , Behaviour on laptops, Invoking
-@section Exit codes
-@cindex exit codes
-@cindex error conditions
-@cindex errors
-The following are the status codes returned to the operating system
-when the program terminates.
-
-@table @asis
-@item 0
-No problems.
-
-@item 1
-An attempt has been made to start cron but there is already a
-@value{CONFIG_PID_FILE} file.  If there really is no other cron daemon
-running (this does not include invokations of mcron) then you should
-remove this file before attempting to run cron.
-
-@item 2
-In parsing a guile configuration file, a @code{job} command has been
-seen but the second argument is neither a procedure, list or
-string.  This argument is the job's action, and needs to be specified
-in one of these forms.
-
-@item 3
-In parsing a guile configuration file, a @code{job} command has been
-seen but the first argument is neither a procedure, list or
-string.  This argument is the job's next-time specification, and needs
-to be specified in one of these forms.
-
-@item 4
-An attempt to run cron has been made by a user who does not have
-permission to access the crontabs in @value{CONFIG_SPOOL_DIR}.  These
-files should be readable only by root, and the cron daemon must be run
-as root.
-
-@item 5
-An attempt to run mcron has been made, but there are no jobs to
-schedule!
-
-@item 6
-The system administrator has blocked this user from using crontab with
-the files @value{CONFIG_ALLOW_FILE} and @value{CONFIG_DENY_FILE}.
-
-@item 7
-Crontab has been run with more than one of the arguments @code{-l},
-@code{-r}, @code{-e}.  These are mutually exclusive options.
-
-@item 8
-Crontab has been run with the -u option by a user other than
-root.  Only root is allowed to use this option.
-
-@item 9
-An invalid vixie-style time specification has been supplied.
-
-@item 10
-An invalid vixie-style job specification has been supplied.
-
-@item 11
-A bad line has been seen in /etc/crontab.
-
-@item 12
-The last component of the name of the program was not one of
-@code{mcron}, @code{cron}, @code{crond} or @code{crontab}.
-
-@item 13
-Either none of the user's configuration directories exist, or there is a problem
-reading the files there.  The configuration directories are ~/.cron
-and the directory pointed to by the @code{XDG_CONFIG_HOME} environment
-variable, or ~/.config/cron if this is not set.
-
-@c @item 14
-@c There is a problem writing to /var/cron/update.  This is probably
-@c because the crontab program is not installed SUID root, as it should
-@c be.
-
-@item 15
-Crontab has been run without any arguments at all.  There is no default
-behaviour in this case.
-
-@item 16
-Cron has been run by a user other than root.
-
-@end table
-
-
-
-@node Guile modules, Index, Invoking, Top
-@chapter Guile modules
-Some of the key parts of mcron are implemented as modules so they can
-be incorporated into other Guile programs, or even into C-sourced
-programs if they are linked against libguile.
-
-It may be, for example, that a program needs to perform house-keeping
-functions at certain times of the day, in which case it can spawn
-(either fork or thread) a sub-process which uses a built-in
-mcron.  Another example may be a program which must sleep until some
-non-absolute time specified on the Gregorian calendar (the first day
-of next week, for example).  Finally, it may be the wish of the user to
-provide a program with the functionality of mcron plus a bit extra.
-
-The core module maintains mcron's internal job lists, and provides the
-main wait-run-wait loop that is mcron's main function.  It also
-introduces the facilities for accumulating a set of environment
-modifiers, which take effect when jobs run.
-
-@menu
-* The core module::             The job list and execution loop.
-* The redirect module::         Sending output of jobs to a mail box.
-* The vixie-time module::       Parsing vixie-style time specifications.
-* The job-specifier module::    All commands for scheme configuration files.
-* The vixie-specification module::  Commands for reading vixie-style crontabs.
-@end menu
-
-@node The core module, The redirect module, Guile modules, Guile modules
-@section The core module
-@cindex guile module
-@cindex core module
-@cindex modules, core
-
-This module may be used by including @code{(use-modules (mcron core))}
-in a program.  The main functions are @code{add-job} and
-@code{run-job-loop}, which allow a program to create a list of job
-specifications to run, and then to initiate the wait-run-wait loop
-firing the jobs off at the requisite times.  However, before they are
-introduced two functions which manipulate the environment that takes
-effect when a job runs are defined.
-
-@cindex environment
-The environment is a set of name-value pairs which is built up
-incrementally.  Each time the @code{add-job} function is called, the
-environment modifiers that have been accumulated up to that point are
-stored with the new job specification, and when the job actually runs
-these name-value pairs are used to modify the run-time environment in
-effect.
-
-@deffn{Scheme procedure} append-environment-mods name value
-When a job is run make sure the environment variable @var{name} has
-the value @var{value}.
-@end deffn
-
-@deffn{Scheme procedure} clear-environment-mods
-This procedure causes all the environment modifiers that have been
-specified so far to be forgotten.
-@end deffn
-
-@deffn{Scheme procedure} add-job time-proc action displayable configuration-time configuration-user
-This procedure adds a job specification to the list of all jobs to
-run.  @var{time-proc} should be a procedure taking exactly one argument
-which will be a UNIX time.  This procedure must compute the next time
-that the job should run, and return the result.  @var{action} should be
-a procedure taking no arguments, and contains the instructions that
-actually get executed whenever the job is scheduled to
-run.  @var{displayable} should be a string, and is only for the use of
-humans; it can be anything which identifies or simply gives a clue as
-to the purpose or function of this job.  @var{configuration-time} is
-the time from which the first invokation of this job should be
-computed.  Finally, @var{configuration-user} should be the passwd entry
-for the user under whose personality the job is to run.
-@end deffn
-
-@deffn{Scheme procedure} run-job-loop . fd-list
-@cindex file descriptors
-@cindex interrupting the mcron loop
-This procedure returns only under exceptional circumstances, but
-usually loops forever waiting for the next time to arrive when a job
-needs to run, running that job, recomputing the next run time, and
-then waiting again.  However, the wait can be interrupted by data
-becoming available for reading on one of the file descriptors in the
-fd-list, if supplied.  Only in this case will the procedure return to
-the calling program, which may then make modifications to the job list
-before calling the @code{run-job-loop} procedure again to resume execution of
-the mcron core.
-@end deffn
-
-@deffn{Scheme procedure} remove-user-jobs user
-
-The argument @var{user} should be a string naming a user (his
-login name), or an integer UID, or an object representing the user's passwd
-entry.  All jobs on the current job list that are scheduled to be run
-under this personality are removed from the job list.
-@end deffn
-
-@deffn{Scheme procedure} get-schedule count
-@cindex schedule of jobs
-The argument @var{count} should be an integer value giving the number
-of time-points in the future to report that jobs will run as.  Note
-that this procedure is disruptive; if @code{run-job-loop} is called
-after this procedure, the first job to run will be the one after the
-last job that was reported in the schedule report.  The report itself
-is returned to the calling program as a string.
-@end deffn
-
-@node The redirect module, The vixie-time module, The core module, Guile modules
-@section The redirect module
-@cindex redirect module
-@cindex modules, redirect
-
-This module is introduced to a program with the command
-@code{(use-modules (mcron redirect))}.
-
-This module provides the @code{with-mail-out} function, described
-fully in @ref{Guile Syntax}.
-
-@node The vixie-time module, The job-specifier module, The redirect module, Guile modules
-@section The vixie-time module
-@cindex vixie-time module
-@cindex modules, vixie-time
-
-This module is introduced to a program by @code{(use-modules (mcron
-vixie-time))}.
-
-This module provides a single method for converting a vixie-style time
-specification into a procedure which can be used as the
-@code{next-time-function} to the core @code{add-job} procedure, or to
-the @code{job-specifier} @code{job} procedure.  See @ref{Vixie Syntax}
-for full details of the allowed format for the time string.
-
-@deffn{Scheme procedure} parse-vixie-time time-string
-The single argument @var{time-string} should be a string containing a
-vixie-style time specification, and the return value is the required
-procedure.
-@end deffn
-
-
-@node The job-specifier module, The vixie-specification module, The vixie-time module, Guile modules
-@section The job-specifier module
-@cindex job-specifier module
-@cindex modules, job-specifier
-
-This module is introduced to a program by @code{(use-modules (mcron
-job-specifier))}.
-
-This module provides all the functions available to user's Guile
-configuration files, namely @code{range}, @code{next-year-from},
-@code{next-year}, @code{next-month-from}, @code{next-month},
-@code{next-day-from}, @code{next-day}, @code{next-hour-from},
-@code{next-hour}, @code{next-minute-from}, @code{next-minute},
-@code{next-second-from}, @code{next-second},
- and last but not least, @code{job}.  See @ref{Guile Syntax} for full
- details.
-
-Once this module is loaded, a scheme configuration file can be used to
-put jobs onto the job list simply by @code{load}ing the file.
-
-@node The vixie-specification module,  , The job-specifier module, Guile modules
-@section The vixie-specification module
-@cindex vixie-specification module
-@cindex modules, vixie-specification
-
-To use this module, put the command @code{(use-modules (mcron
-vixie-specification))} into your program.
-
-This module exports a couple of functions for adding jobs to the
-internal job list according to a Vixie-style crontab file.
-
-@deffn{Scheme procedure} read-vixie-port port . parse-line
-
-This procedure reads a crontab from the given port, and adds jobs to
-the job list accordingly, taking care of environment specifications
-and comments which may appear in such a file.
-
-@var{parse-line} should not normally be used, except that if you are
-parsing a (deprecated) @code{/etc/crontab} file with a slightly
-modified syntax, you may pass the value @var{parse-system-vixie-line}
-as the optional argument.
-
-@end deffn
-
-@deffn{Scheme procedure} read-vixie-file name . parse-line
-
-This procedure attempts to open the named file, and if it fails will
-return silently.  Otherwise, the behaviour is identical to
-@code{read-vixie-port} above.
-
-@end deffn
-
-Once this module has been declared in a program, a crontab file can be
-used to augment the current job list with a call to
-@code{read-vixie-file}.
-
-@node Index,  , Guile modules, Top
-@unnumbered Index
-
-@printindex cp
-
-@bye